VICES (BANGLE, CLAMP, ENGRAVER, MITRE, PIN & RING) Ø10mm (Max) Tube Cutting Jig
• Hold the handle and move the extendible back plate to the desired tube length
• Lock the hexagonal nut on the side so the back plate does not move
• With your thumb push down on the tube/wire with the securing/holding handle
• Put your piecing saw blade into the desired slit • You can now start saw piecing the tube/wire vertically, accurately and with a flush finish
Code T42909 Description
Ø10mm (Max) Tube Cutting Jig, Multiple Angles
UOM EACH Price £32.50 A*F Swiss 182.211
PIN VICES, CHUCKS & TONGS
Cousins Material House incredible value Joint Leveller is accurate for cutting tube/wire vertically faultlessly.
• Accurate tube/wire cutting vertically • Gives flush cuts • Can hold up to Ø10mm wire/tubing • For the jeweller, silversmith, arts, craft, contemporary jeweller, model makers and light engineers.
• Easy tool for cutting tubing or rods. • Made of precision steel with a contoured sturdy handle; also comes with a removable handle for mounting the jig in a bench vice.
• Capacity holding size 10.00mm • Please note the gauge size (5) measures 0 to 30mm but the slide gauge actually extends up to 60mm
• Smallest wire length that can be cut is 1.50mm • 250g
How to use᷃
As per item T31883 except tube/wire length measurement needs to be acheived manually by using the slide gauge with an additional ruler.
Code T35170 Description Ø10mm (Max) Tube Cutting Jig
UOM EACH
Price £13.95
Ø10mm (Max) Tube Cutting Jig, Multiple Angles
Pin Chuck Adaptors
Ideal Adaptor for Micromotors & Pendant Drills
• Multi colleted rotary drill pin vice sets • Multi shank diameter options • Useful adapters with different capacity chucks
• Also allows use of miniature drills with normal power drill chucks which do not close to small sizes
• Will fit micro motors and quick release hand pieces
Popular rotary equipment and headpieces for the Multi collets rotary drill pin vice set • Foredom Handpiece No.18 (Press To Quick Release Action) code FD18
• Foredom High Speed Rotary Micro motor Kit code K1070CE
• Jewellers Kit & No20 “Quick Release” Hand piece code K2220CE
Ideal Adaptor for Micromotors & Pendant Drills
Pin Chuck Adaptor (shank Ø2.35mm)
• Pin chuck adapter • Collet fitting from Ø0.00 to Ø1.20mm • Ø2.35mm shank • 55mm overall length • Black finish • Made in France • Horotec 02.035
Code P53251 Description UOM Price Pin Chuck Adapter, Horotec 02.035 EACH £15.95 Ideal Adaptor for Micromotors & Pendant Drills
• Multi collets rotary drill pin vice set • A useful adapter with two different capacity chucks. • For adapting 2.35mm (3/32”) collets on rotary tools and flex shaft hand pieces to more useful range 0 to 2.35mm
• Also allows use of miniature drills with normal power drill chucks which do not close to these sizes
An enhanced version of a fantastic tool. Cut tubes and wires to perfect angles with a flush using the angled tube cutter.
• 90, 15, 30 & 45 degree cuts all possible • Gives flush cuts • Accurate tube/wire cutting vertically • Can hold up to Ø10mm wire/tubing • For the jeweller, silversmith, arts, craft, contemporary jeweller, model makers and light engineers
• Easy tool for cutting tubing or rods • Made of precision steel with a contoured sturdy handle; also comes with a removable handle for mounting the jig in a bench vice
How to use:
www.COUSINS .COM
• Will fit micro motors and quick release hand pieces • Supplied in plastic wallet • Made in India
Dimensions: • Shank mount size Ø2.35mm or 3/32” • Consists of 2 collets: - Ø1.65 to 2.35mm - Ø0.00 to 1.15mm
Code P39353 Description
Pin Chuck Adaptor (shank Ø2.35mm)
UOM Price EACH £2.95
Ideal Adaptor for Micromotors, Pendant Drills or Household drills
• A useful adapter for using micro drills • For adapting Ø3.15mm (1/8”) collets on rotary tools and flex shaft hand pieces to use micro drills
• Also allows use of miniature drills with normal power drill chucks which do not close to these sizes
• Made in India
Dimensions: • Shank mount size Ø3.15mm or 1/8” • Ø0.00 to Ø2.00mm capacity • Overal length 32mm
Code P39354 Description
Pin Chuck Adapter (Shank Ø3.15mm)
UOM Price EACH £1.50
Pin Chuck Adaptor (shank Ø3.15mm)
A useful set with different capacity chucks for holding drill bits. Adapts 2.35mm (3/32”) collets on rotary tools and hand pieces to a more useful capacity from 0 to 3.00mm.
Ideal adaptor for micromotors & pendant drills especially with quick release hand pieces, plus also allows use of miniature drills with normal power drill chucks which do not close to small sizes.
Made in India
Dimensions: • Shank mount size Ø2.35mm or 3/32” • 4 Collets sizes closing to: Ø0 - 1.5mm - 2.5mm - 3mm
• Overall Length 65mm Code
P1224
V52445 V47213 V52444 V47215
Description
Pin Chuck Adaptor (shank Ø2.35mm)
Ø0.00mm Spare Collet Ø1.50mm Spare Collet Ø2.50mm Spare Collet Ø3.00mm Spare Collet
Pin Chuck Adaptor (shank Ø2.35mm), Horotec Swiss
UOM Price
PACK*4 EACH
EACH EACH EACH
£8.50 £1.15
£1.15 £1.15 £1.15
Pin Chuck Adaptor (shank Ø2.35mm), A*F Swiss
VICES (BANGLE, CLAMP, ENGRAVER, MITRE, PIN & RING)
1065
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102
