POLISHING & FINISHING
No.15D - Hammer Action with Duplex Spring
• Handpiece has a reciprocating rather than rotary action and is used at low speed (0-5,000 rpm) by jewellers for stone setting and decorative work.
• It requires periodic lubrication. • The hammer has a 1/32” stroke and its impact force can be adjusted from light to heavy by turning the silver knurled adjusting ring.
• It comes with an Anvil Point (FD1577) and pin for installing and tightening points.
•A Pavé point (R15PT) for special texturing and stylus with carbide tip (10212) for marking or scribing hardened steel are available separately
• Replacement bearing available, our code F50420 • The duplex spring provides extra flexibility & is recommended for experienced users only
Dimensions: • 6 1/4” long • 1/4” diameter at tip
• Weight 3.65 oz Code
FD15D Description
Handpiece (No.15D) - Hammer Action with Duplex Spring
UOM Price EACH £119.95
The H.20 is for exclusive use with 3/32” (2.35mm) shank burs. A lever action on the the handpiece body is all that is required to change accessories. It has a molded plastic front grip with tapered sides for easy and close handling, plus pre-lubricated ball bearings that do not require additional lubrication.
The collet in this handpiece can be adjusted if the hold on a bur shank is not secure, please see the video link above
Dimensions: • 5 5/8” Long • 1 1/8” Diameter (center) 3/8” diameter (front taper) • Weight 4 oz.
No.18 - Press Quick Release
Replacement collet: FDHP31008 Code
Description FD20
Foredom’s most popular Quick Change handpiece features a super slim grip and lever action that opens and closes the collet.
The H.18 is for use with only 2.35mm (3/32”) shank burs. A press lever action is all that is required to change accessories. It features a very slim grip and pre-lubricated ball bearings that do not require any lubrication .Removing and cleaning of the precision collet is easy to do.
Collet: FDHP703
Dimensions: • 7” Long • 19/32” Diameter • Weight 3.65 oz.
Tip: When you go to pull the bur out, press the lever and press bur IN slightly before removing. This makes
removing the burr much easier! Code
Description FD18
Handpiece (No.18) - Press Quick Release
UOM Price EACH £99.95
Handpiece (No.20) - Lever Quick Release
UOM Price EACH £69.95 • Weight 5.305 oz.
Tip: When you go to pull the bur out, press the lever and press bur IN slightly before removing. This makes
removing the burr much easier! Code
Description FD18D
Handpiece (No.18D) - Press Quick Release with Duplex Spring
UOM Price EACH £124.95
• Other fractional and metric collets are available separately and in Collet Set FDHP103000.
Dimensions: • 5 3/8” long, • 1 1/32” diameter
• Weight 7.15oz. Code
FD25 No.20 - Lever Quick Release No.28 - Tapered Grip Description
Handpiece (No.25) - Heavy Duty with Collet Fitting
UOM Price EACH £99.00
The H.28 has a slender, comfortable design with tapered grip and pre-lubricated ball bearings that do not require lubrication. Comes with 3/32” and 1/8” collets, and pin and chuck wrench for changing collets and accessories.
Dimensions: • 5 1/4” Long • 23/32” Diameter (center), 1/2” diameter (taper) • Weight 3 oz.
Collets: Other fractional and metric collets are available and in Collet Set FDHP600 (HP600).
5 1/4” long, 3/4” diameter (center), 1/2” diameter (taper), weight 3 oz.
Code FD28
Description UOM Price Handpiece (No.28) - Tapered Grip EACH £47.95
No.20D - Lever Quick Release with Duplex Spring
The H.20 is for exclusive use with 3/32” (2.35mm) shank burs. A lever action on the the handpiece body is all that is required to change accessories. It has a molded plastic front grip with tapered sides for easy and close handling, plus pre-lubricated ball bearings that do not require additional lubrication.
The collet in this handpiece can be adjusted if the hold on a bur shank is not secure, please see the video link above.
The duplex spring provides extra flexibility & is recommended for experienced users only
Dimensions: • 10 1/8” Long • 1 1/8” Diameter (center) 3/8” diameter (front taper) • Weight 5.40 oz.
No.18D - Press Quick Release with Duplex Spring
Foredom’s most popular Quick Change handpiece features a super slim grip and lever action that opens and closes the collet.
The H.18 is for use with only 2.35mm (3/32”) shank burs. A press lever action is all that is required to change accessories. It features a very slim grip and pre-lubricated ball bearings that do not require any
lubrication.Removing and cleaning of the precision collet is easy to do.
Collet: FDHP703
The duplex spring provides extra flexibility & is recommended for experienced users only
Dimensions: • 10 3/8” Long • 19/32” Diameter
• Nos. 25 and 25C are precision handpieces made for continuous production work.
• Two models available with collets (No. 25) or eared 3-jaw No.0 chuck (No. 25C).
• Both have heavier duty housings and double shielded ball bearings.
• No. 25 comes with 1/8” (3.18mm) and 1/4” (6.35mm) collets, and pin and chuck wrench.
www.COUSINS .COM
Replacement collet: FDHP31008 Code
Description FD20D
Handpiece (No.20D) - Lever Quick Release with Duplex Spring
No.25 - Heavy Duty with Collet Fitting
UOM Price EACH £75.95 No.30 - 3 Jaw Chuck Fitting, Popular
The H.30 ® general purpose handpiece has prelubricated ball bearings that require no maintenance (no additional lubrication). Comes with HPCK-0 Chuck Key in molded plastic handle for changing accessories. Replacement chuck keys are shown below in related products.
Dimensions: • 5 3/16” Long • 1” Diameter • Weight 5.85 oz. • Can take up to Ø4mm shank burr
Various bench top tools attach to this versatile handpiece, such as the Foredom drill press, Angle Grinder Attachment, Belt Sander Attachment, Handpiece Holder, and AllSet ® Stone Setting Kits.
Spare chuck key our code FDCK0 Code
Description FD30
Handpiece (No.30) - 3 Jaw Chuck Fitting, Popular
No.35 - Speed Increaser UOM Price EACH £48.95
Unique handpiece with a ball bearing speed increaser that produces 2.5 times the speed of the motor. This feature makes it perfect for bright cutting with diamond flywheels and other high speed work with carbide and diamond points.
• No. 35 handpiece comes with a 1/8” (3.18mm) collet installed unless otherwise specified.
• Other fractional and metric collets are available separately and in Collet Set 103000.
981
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102
