VICES ( BANGLE CLAMP, E VER, MITRE IN & RING
Bangle & Bracelet Rotation Wooden Holder
ICESB (ANGLE, CL,AMP, ENGRANGRAVER, P MITRE, P)IN & RING) Ring Clamp Levers, Wood
putting pressure inside the ring and hence locking, ready to be worked on.
• Will hold from sizes H to M • Wooden jaws • Wing nut winder • If you require a clamp for larger and smaller sizes take a look at ring holding clamp with 9 dies (Code R20127)
• Overall length 145mm • Weight: 84 grams
Code
Holding a ring to polish inside can be awkward, particularly with smaller sized rings.
This tool combats all of these problems with ease assuring you the completing of the job efficiently.
Bangle and Bracelet rotation wooden holder is lightweight and easily controllable.
Secure in a vice and unscrew the wing nut and remove the washer, take the wooden wheel from the handle, melts some shellac (S31924) on the wheel and secure the item to be polished.
Once the shellac has solidified around the bracelet or chain the user can tighten and loosen the wing nut to turn the piece allowing a concentrated, safer and easier way of polishing. Simply apply low heat to melt the Shellac once finished polishing. You can also use this tool to secure your stone setting with shellac so it is easier to work on.
• Size: 240mm x 75mm x 40mm • Diameter of rotation disc holder 80mm • Weight: 190g
Code B20861 Description
Bangle & Bracelet Rotation Wooden Holder
UOM EACH Price £4.35
Wooden Holder for Bracelets and Chains
Ring Clamp with 9 Dies
• Soft leather jaws for extra protection • Easy handle winder • Overall length 130mm
• Jaw width 30mm Code
R45547 Description
End Locking Clamp with Leather Jaws
UOM Price EACH £5.95 Ring Clamp with End Screw
This exceptional tool allows you to access the circumference of a ring.
Firmly grips the ring from the inside without marking, allowing work on the outside of the ring.
Wooden Holder for Bracelets and Chains is made from lightweight wood and makes polishing safer and easier. Place your item in the special cut out groove and hold the Wooden Holder through the centre hole. The tool enables a uniform polish safely and easily with no twisting and knotting as well as giving complete control.
Handy tip᷃ You can also hold you’re your bracelet so you can repair or make intricate stone settings. Melt some shellac (S31924) into the groove and secure your bracelet ready to work on.
• Size: 85mm x 55mmx 20mm • Weight: 40g
Code H31869 Description
Wooden Holder for Bracelets and Chains
UOM EACH Price £5.95
• Mount the ring with ease, with the cleverly designed knurled hand operated head locking thread and pin. Or lock the ring with an Allen key and hex head nut giving extra holding power.
• Includes nine plastic sleeve inserts from sizes 13mm to 22mm in diameter which cover the standard A to Z British Sizes.
• Smooth hardwood handles for comfortable hand- held operations.
• Unit comes in a quality wooded finished storage box
Weight: 525 grams Code
R20127 Description
Internal Holding Ring Clamp with 9 Dies
UOM Price EACH £28.50
• Thread action grips like a bench vice and allows rapid and accurate positioning of the ring
• Aluminium • Features lined jaws to prevent damage to the ring • Comfortable, rubber covered handle • Easily dismantled for cleaning • Made in India
Dimensions: • Height 190mm • Diameter of rubber covered handle 30mm • Jaw size: 30mm x 30mm – jaws opening 8mm
• Weight: 400g Code
Ring Clamp with End Screw R39564 Description Ring Clamp, Screw End
Ring Clamp with End Screw, A*F Swiss
This ring clamp enables you to hold rings internally in order to work on the outer face of the ring easily.
Unwind the wing nut anti-clockwise to loosen the centre metal taper; mount the ring on the opposing end. To secure, turn the wing nut clockwise and the taper will tighten. This expands the four wooden jaws
UOM Price EACH £22.95
We also supply a large range of inside felts, abrasives and final finish cotton inside cones in a variety of sizes and materials to cater for all inside ring finishing.
Features • Light weight • Spring loaded • 200mm in length and only weighing • Will hold practically any size, shape and style of ring, wedding, signet, eternity, etc
Weight: 42 grams Code
P19731 Description Ring Holding Wooden Clamp
UOM Price EACH
Ring Clamp with End Screw, Leather Jaws
R4624 Description
Internal Holding Ring Clamp (Wood) with End Screw
UOM Price EACH £3.65
This ring clamp enables you to hold rings internally in order to work on the outer face of the ring easily.
£3.15
Twist the handle to loosen the centre metal taper; mount the ring on the opposing end. To secure, turn the wing nut clockwise and the taper will tighten. This expands the four wooden jaws putting pressure inside the ring and hence locking, ready to be worked on.
This A*F Swiss is our most prestigious ring clamp from our range. Strong and robust, it can handle large
1060 COUSINS TRADE SUPPLIER
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102