POLISHING & FINISHING Motor with Slip Joint Fitting
Pendant Drill
Handpieces, Collets & Maintenance, Foredom
Key Tip (U.S.A.) Fitting Handpieces
Collets: Other fractional and metric collets are available separately and in Collet Set D0455 (HP600)
The duplex spring provides extra flexibility & is recommended for experienced users only
Dimensions: • 9 3/8” Long • 5/8” Diameter • Weight 5.2 oz.
Code FD8D Description
Handpiece (No.8D) - Slim with Chuck Guard & Duplex Spring
No.10 - Rotating Lever Quick Release
Key Tip (U.S.A.) Fitting Handpieces What is an Interchangeable Handpiece?
“European Slip joint Fitting”
Build your own kit! Choose a motor, pick a handpiece with the same flexshaft fitting and you have your custom made kit!
Foredom SR Kit Includes: • Reversible Motor • Foot pedal speed control • European “slip joint” hand piece fitting shaft • 90cm long flexshaft
Foredom flexible shaft power tool with European motor & slip joint flexible shaft and foot control.
• Motor has the power and speed required for industrial applications
• Ideal for Jewellery production, woodcarving, sculpting and other work
• There is a selection of nine interchangeable European slip joint handpieces to use with it
• All the power and speed needed to accomplish every job without stalling or slowing down while under normal load
• Will take any of our European style, slip joint fitting hand pieces
Foot control has a power cable with UK style plug.
• CE marked and meet all electrical and safety requirements.
• Variable Speed from 0 to 18,000 RPM • 1/6 Horsepower • 125 Watts, 9 Amps • Reversible universal motor with ball bearings runs in forward and reverse.
• For use on 220 Volts • Two year warranty • European style hand fitting • UK plug
Available separately: • Replacement Brushes: MP132P • Dial speed control (table top): F48215 • Replacement inner shaft: FD108141 • Replacement outer shaft: FD108142 • Slip joint fitting to Key tip fitting conversion adapter: FDHP771
Code FDSR2CE Description
Foredom SR Slip Joint Motor with Foot Control (Handpiece not included)
UOM Price EACH £189.95
The H.8 is also a slim collet type handpiece with pre- lubricated ball bearings that require no maintenance. It has a chuck guard that slides back when changing burs. Comes with 3/32” and 1/8” collets and chuck wrenches for changing collets and accessories.
Collets: Other fractional and metric collets are available separatel and in Collet Set D0455 (HP600).
Dimensions: • 6 1/8” Long • 5/8” Diameter
• Weight 3.55 oz. Code
FD8 Description
Handpiece (No.8) - Slim with Chuck Guard
No.8D - Slim with Chuck Guard & Duplex Spring
Collet-type chuck handpiece with slim design and chuck guard sleeve that protects fingers when working close and slides back when changing collets and accessories.
Comes with 3/32” (2.35mm) and 1/8” (3.18mm) collets, and set of chuck wrenches.
980 COUSINS TRADE SUPPLIER UOM Price EACH £48.95
• Handpiece has a reciprocating rather than rotary action and is used at low speed (0-5,000 rpm) by jewellers for stone setting and decorative work.
• Requires periodic lubrication • The hammer has a 1/32” stroke and its impact force can be adjusted from light to heavy by turning the silver knurled adjusting ring
• It comes with an Anvil Point (FD1577) and pin for installing and tightening points.
•A Pavé point (R15PT) for special texturing and stylus with carbide tip (10212) for marking or scribing hardened steel are available separately
• Replacement bearing available, our code F50420
Dimensions: • 6 1/4” long • 1/4” diameter at tip • Weight 3.65 oz
Code FD15
Description Handpiece (No.15) - Hammer Action
UOM Price EACH £105.00
Foredom’s Quick Disconnect or “QD” feature makes it fast and easy to interchange handpieces to any flexible shaft. QD refers to the back portion of Foredom’s extensive selection of “QD” type handpieces. Inside the QD is a round connector with a slot that accepts the “keyed tip” on the end of the flexible shaft. Since the QD’s are the same on all handpieces of this type, they are interchangeable and can be attached or removed with ease.
When attaching a handpiece, be sure that the keyed tip of the flexible shaft is properly lined up with
the slot in the back end by looking inside before pushing it on.
To remove, simply pull the handpiece off the shaft with a firm grip.
No.8 - Slim with Chuck Guard
The H.10 is a slender handpiece with rotating lever action that releases and closes the collet for quick and easy changes. It requires lubrication after the first 2-3 months of continuous use. For use ONLY with 2.35mm (3/32”) burs.
Dimensions: • 7 5/16” Long • 21/32” Diameter • Weight 4.55 oz.
Code FD10 Description
Handpiece (No.10) - Rotating Lever Quick Release
UOM Price EACH £194.95 UOM Price EACH £73.95
No.10D - Rotating Lever Quick Release with Duplex Spring
The H.10 is a slender handpiece with rotating lever action that releases and closes the collet for quick and easy changes. It requires lubrication after the first 2-3 months of continuous use. For use ONLY with 2.35mm (3/32”) burs.
The duplex spring provides extra flexibility & is recommended for experienced users only
Dimensions: • 7 5/16” Long • 21/32” Diameter • Weight 4.55 oz.
Code FD10D Description
Handpiece (No.10D) - Rotating Lever Quick Release with Duplex Spring
No.15 - Hammer Action UOM Price EACH £189.95
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102
