TAPS & DIES D51728
D51729
Ø1.30mm (OD 8mm) HSS, German EACH £23.95 EACH £23.95
Ø1.40mm (OD 16mm) HSS, German
Ø16 & 20mm (HSS), Bergeon Bergeon & Horotec - H.S.S. (High Speed Steel)
Bergeon Swiss Made • Ø16 & 20mm (outside) • High Speed Steel (HSS) • Metric • Bergeon Swiss
Dies individual HSS with outside diameter die Ø16mm to Ø20mm • Use with die holder D6438 for 1mm to 3mm
• Use with die holder D6439 for 3mm to 4mm • Use with die holder D6440 for 4.5mm to 6mm
Code
D32840 D32841 D32803 D32842 D32843 D32844 D32853 D32845 D32846 D32847 D32848 D32849 D32850 D32851 D32852
Description
Ø1.00mm (OD 16mm) HSS, Swiss Ø1.10mm (OD 16mm) HSS, Swiss Ø1.20mm (OD 16mm) HSS, Swiss Ø1.70mm (OD 16mm) HSS, Swiss Ø1.80mm (OD 16mm) HSS, Swiss Ø2.00mm (OD 16mm) HSS, Swiss Ø2.30mm (OD 16mm) HSS, Swiss Ø2.60mm (OD 16mm) HSS, Swiss
UOM Price EACH £79.95
EACH £79.95 EACH £75.70 EACH £62.75 EACH £62.75 EACH £62.75 EACH £62.75 EACH £62.75
Ø3.00mm (OD 20mm) HSS, Swiss EACH £62.75 Ø3.50mm (OD 20mm) HSS, Swiss EACH £62.75 Ø4.00mm (OD 20mm) HSS, Swiss EACH £62.75 Ø4.50mm (OD 20mm) HSS, Swiss EACH £62.75 Ø5.00mm (OD 20mm) HSS, Swiss EACH £62.75 Ø5.50mm (OD 20mm) HSS, Swiss EACH £89.95 Ø6.00mm (OD 20mm) HSS, Swiss EACH £62.75
• Bergeon 5322 (HSS) • Bergeon 30063B2 (HSS) • Horotec MSA.04.524 (HSS) • Made in Germany (HSS) • Made in China (HSS)
Tap Holders: • Use tap holder T9476 for Ø0.3mm to Ø1.0mm • Use tap holder T9467 for Ø0.8mm to Ø1.5mm • Use tap holder T6441 for Ø1.0mm to Ø1.8mm • Use tap holder T6442 for Ø2.0mm to Ø10mm • Use adjustable tap holder D4749 for Ø1.0mm to Ø6mm
• Use none Swiss tap holder T8678 for Ø1mm to Ø6mm
Code
T37122 T4712A T42092 T48749 T4714
T45757 T48750 T36959 T48751 T4718
T37077 T48752 T35883 T48753 T4722
TAPS (BY SIZE)
A tap creates an internal thread Using taps:
Firstly, drill a hole 0.1mm* smaller than the desired thread size. For instance if the hole size is 1mm use a 1.10mm tap. Always use one or two tenths of a greater size so the tap incises the hole. This will give an efficient cutting thread to the hole ready to be screwed.
The work piece must be securely supported. When starting the cutting, the tap must be help perpendicularly. Clockwise, turn the tap into the hole, one rotation at a time, to ensure no debris from the process falls into the hole. Use air cleaner or a rubber blower to clean the hole before, during and after tapping. Tapping too fast can shatter the tap. Additionally debris left in the hole causes clogging and the thread may distort, hence breakage. Excessive force will result break the tap. Cut lube or Bees Wax should be used.
*Sizes vary on the type of metal being tapped, 0.10mm difference will suffice on softer metals such as 22ct or pure gold, however 0.20mm maybe required for harder metals such as silver or 9ct.
*PLEASE NOTE: NEVER turn a tap in a die, doing this will damage the threads on both tools, use a measuring gauge (G9737) to determine the size of the tap needed.
T36787 T48754 T32257 T48755 T38225 T35423 T48756 T37076 T45758 T48757 T28052 T48758 T35422 T48759 T37753 T48760 T38257 T48761 T45759 T48762 T6455
T45760 T45761 T45762 T45763 T48763 T45764 T48764 T45765 T48765 T6460
T45766 T48766 T6461
T45767 T48767 T45768 T48768
Description
Ø0.30mm Horotec MSA 04.524 Ø0.35mm Horotec MSA 04.524 Ø0.40mm Horotec MSA 04.524 Ø0.40mm, China
Ø0.45mm Bergeon 5322
Ø0.50mm Horotec MSA 04.524 Ø0.50mm, China
Ø0.60mm Horotec MSA 04.524 Ø0.60mm, China
Ø0.65mm Bergeon 5322
Ø0.70mm Horotec MSA 04.524 Ø0.70mm, China
Ø0.80mm Horotec MSA 04.524 Ø0.80mm, China
Ø0.85mm Bergeon 5322
Ø0.90mm Horotec MSA 04.524 Ø0.90mm, China
Ø1.00mm Horotec MSA 04.524 Ø1.00mm, China
Ø1.10mm Horotec MSA 04.524 Ø1.20mm Horotec MSA 04.524 Ø1.20mm, China
Ø1.30mm Horotec MSA 04.524 Ø1.40mm Horotec MSA 04.524 Ø1.40mm, China
Ø1.50mm Horotec MSA 04.524 Ø1.50mm. China
Ø1.60mm Horotec MSA 04.524 Ø1.60mm, China
Ø1.70mm Horotec MSA 04.524 Ø1.70mm, China
Ø1.80mm Horotec MSA 04.524 Ø1.80mm, China
Ø2.00mm Horotec MSA 04.524 Ø2.00mm, China
Ø2.20mm Bergeon 30063B2 Ø2.20mm Horotec MSA 04.524 Ø2.30mm Horotec MSA 04.524 Ø2.40mm Horotec MSA 04.524 Ø2.50mm Horotec MSA 04.524 Ø2.50mm, China
Ø2.60mm Horotec MSA 04.524 Ø2.60mm, China
Ø3.00mm Horotec MSA 04.524 Ø3.00mm, China
Ø3.50mm Bergeon 30063B2 Ø3.50mm Horotec MSA 04.524 Ø3.50mm, China
Ø4.00mm Bergeon 30063B2 Ø4.00mm Horotec MSA 04.524 Ø4.00mm, China
Ø4.50mm Horotec MSA 04.524 Ø4.50mm, China
UOM Price EACH £23.95
EACH £23.86 EACH £23.95 £4.95
EACH
EACH £15.45 EACH £19.95 £4.95
EACH
EACH £18.95 £4.95
EACH
EACH £12.95 EACH £12.95 £4.95
EACH
EACH £12.95 £4.95
EACH
EACH £12.95 EACH £12.95 £4.95
EACH
EACH £12.95 £4.95
EACH
EACH £12.95 EACH £12.95 £4.95
EACH
EACH £12.95 EACH £13.50 £4.95
EACH
EACH £13.50 £4.95
EACH
EACH £13.50 £4.95
EACH
EACH £13.50 £4.95
EACH
EACH £13.50 £4.95
EACH
EACH £14.95 £4.95
EACH
EACH £35.80 EACH £14.95 EACH £14.95 EACH £14.95 EACH £14.95 £4.95
EACH
EACH £14.95 £4.95
EACH
EACH £16.95 £4.95
EACH
EACH £27.40 EACH £17.15 £4.95
EACH
EACH £24.95 EACH £18.95 £4.95
EACH
EACH £18.95 £4.95
EACH
Engineers, Watchmakers & Jewellers Thread Cutting Die Holder
• Double handled with tightening screws • Swiss made
Bergeon 30064-1: • For Outside Diameter Ø16mm Dies • Tap Sizes: Ø1.00mm to Ø2.60mm
Bergeon 30064-2: • For Outside Diameter Ø20mm Dies • Tap Sizes: Ø3.00mm to Ø4.00mm
Bergeon 30064-3: • For Outside Diameter Ø20mm Dies • Tap Sizes: Ø4.50mm to Ø6.00mm
Code D6438 Description
Ø16mm (Ø1.00mm to Ø2.60mm) Bergeon 30064.1
1036 COUSINS TRADE SUPPLIER UOM Price EACH £20.95 Die Holder - Bergeon 30064
Engineers, Watchmakers & Jewellers Thread Cutting Die Holder
• For Outside Diameter Ø8mm Dies • Double Handled • Bergeon 30010BR
• Swiss made Code
D9313 Description Bergeon 30010BR Die Holder
UOM Price EACH £43.95
Die Holder - Ø8mm (outside) Bergeon 30010BR
Taps (by Size), Metric
T6463
T45769 T48769 T6464 T6465
T45770 T48770 T48748 T48747 T48771
Ø5.00mm Bergeon 30063B2 Ø5.00mm Horotec MSA 04.524 Ø5.00mm, China
Ø5.50mm Bergeon 30063B2 Ø6.00mm Bergeon 30063B2 Ø6.00mm Horotec MSA 04.524 Ø6.00mm, China Ø6.50mm China
Ø6.50mm Germany Ø7.00mm, China
EACH £27.40 EACH £19.95 £4.95
EACH
EACH £53.70 EACH £27.40 EACH £19.95 £4.95 £5.95
EACH EACH
EACH £39.95 £4.95
EACH
TAP & DIE HOLDERS
Die Holder - Ø8mm (outside) Bergeon 4235
Watchmakers & Jewellers Thread Cutting Die Holder • For Outside Diameter Ø8mm Dies
• Bergeon 4235 • Swiss made
Code D4676
Description Bergeon 4235 Die Holder
UOM Price EACH £61.50
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102
