MANUFACTURING TECHNOLOGY
Carlo Salvi: Innovation, know-how and excellence
Carlo Salvi SpA is a world-renowned designer and producer of single die double blow and 2-die 4-blow machines, but the company is able to design much more than just this.
F
or many years Carlo Salvi has specialised in the creation and production of multi-stage, progressive heading machines that enable customers to produce high precision special parts – with very complex shapes – to
be used in a variety of markets, such as aerospace and automotive. Recently Carlo Salvi launched its latest model 616 WS onto the
market – a 6-die progressive header, capable of handling wire with diameter 10mm – 17.5mm. By simply touching an icon on the control panel the operator can recall, in a few seconds, jobs that have been produced previously. In fact it is possible to set-up electronically the position of the K.O pins inside the dies and the wire feed without using any wrenches whatsoever.
degrees of operation available for the opening and closing of the fingers. A special device makes it possible to retain the product during the ejection from the dies – a facility especially recommended for the production of short, special and very complex shape parts.
The K.O on the punch side is innovative and independent
from ram movement. Trimming is made with an advanced cam system, which is permanently assembled on the header. The 616 also includes independent hydraulic lock of the dies. In addition, the header model 616 WS can be equipped with
a pre-heating system. The pre-heating system is induction and the coil is housed in a strategic position, which allows users to heat the material from 600°C up to 950°C before it is transferred into the tooling area. Prior to the cutting area there is an optical pyrometer that constantly monitors to ensure only wire with the correct temperature can reach the working area via the automatically controlled transfer finger unit. A special refrigeration
system positioned in the die holder facilitates the circulation of coolant, while the fireproof sound enclosure and automatic fire suppression equipment assure maximum safety when working in every situation. The same technology has been used on other Carlo Salvi machine models, producing results that Carlo Salvi says represent a new frontier for the market.
www.carlosalvi.it
Wire is fed by grippers, which ensure a very high precision, (+/-0.05mm) thus avoiding damage to wire and offering the maximum clamping over on a greater wire surface area. One set of grippers covers the whole standard wire diameter range and avoids the use of wire stops reducing drastically set-up times and operating costs. The cutter holder is fully guided in order to avoid even minor flexing, while the transfer mechanism consists of independent finger units. Each set of fingers is independently pneumatically clamped so that the correct air pressure can be applied to each set of fingers as required. The oscillating transfer provides for greater flexibility and
86 Fastener + Fixing Magazine • Issue 88 July 2014
Main features of the header model 616 Min and max wire diameter: 10mm – 17.5mm Max shank length: Max head diameter Max cutting tonnage Max heading tonnage Stroke of P.K.O’s
125mm 35mm
12,000daN 155,000daN 40mm
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132