Flexo Techn


echnology


gy


Flexo Technology


New standards in flexo plate cleaning D


and efficient c eaning of flex gr er


The new FlexPlateCleaner cleans and dries flexo plates using a fast, reliable and highly automated process. The plates are transported automatically into the cleaner, where the cleaning prprocess is initiated by photoelectric cells. The system comes with a patented transport system that allows the speed of the plates to be regulated individually via a manual


to be reused immediatel fa


potentiometer. After cleaning and drying at a maximum temperature of 70°C, the plates ar immediately ready for reuse or storage


potentiometer. Af er cleaning and drying at a maximum temperature of 70°C, the plates are immediately ready for reuse or storage.


a transverse brush and a rotating brush wor together. The ‘Speedy’ version is equipped with an additional brush unit. The system automatically adjusts the contact pressure of the washing o the thickness of the plat . Advanced


In the standarn the standard version of the FlexPlateCleaner, a transverse brush and a rotating brush work ogether The ‘Speedy


additional brush unit. The system automatically adjusts the contact pressure of the washing rolollers tlers to the thickness of the plate. Advanced foam rollers ensure that the high-quality flexo plates are cleaned very gently, preventing typical damage caused by manual cleaning


Another benefit is its easy and user-friendly operation. When the contents of the solvent and water tanks reach the minimum level, the


Another benefit is its easy and user-friendly operation. When the contents of the solvent and water tanks reach the minimum level, the


oam rollers ensure that the high-quality flex plates are cleaned very gently, preventing typical damage caused by manual cleaning.


d version of the FlexPlateCleaner ersion is equipped with an


introduced its new FlexPlateCleaner for fast and efficient cleaning of flexographihic printing plates. The powerful system gentlyentl cleans and drieans and dries flexo plates, allowing them to be reused immediately.


units f r the gr ng


es flexo pla es, all wing them


The new FlexPlateCleaner cleans and dries flexo plates using a fast, reliable and highly automated process The plates are transpor ed automatically into the cleaner, where the cleaning ocess is initiated by photoelectric cells The system comes with a patented transport system that allows the speed of the plates to be egulated individually via a manual


.W. R. RENZMANN, a manufacturer of washing machines and distillation units for the graphic arts industry, has


ti


hic arts industry, has as


operator is informed via an audio signal and a change in the LED colour of the ON/OFF button. The cleaning prog ess is also indicated by the colour of the ON/OFF button.


The robust and low-maintenance The robust and low-maintenance


FllexPlateCleaner comes in t o sizes The model 46 can process plates of up to 440mm width and at least 150mm length, while the model 60 can handle up to 580mm width and at least 150mm The maximum plate thickness is 3.5mm.


THE E-SERIES WASHING MACHINE


Elsewhere, D.W. RENZMANN has also introduced the new washing machine 3400-e for thorough cleaning of press parts, ink pans, doc or blades miscellaneous parts and small containers Shor er print runs and frequent job changes mean that uncomplicated, fafast and tho


Elsewher , D.W. RENZMANN has also introduced the new washing machine 3400-e for thorough cleaning of press parts, ink pans, doctor blades, miscellaneous parts and small containers. Shorter print runs and frequent job changes mean that uncomplicated, fast and thoroughrough cleaning of ink ca ying p ess pa ts is no longer , but a necessity. The ex-proof androof and


cleaning of ink-carrrying prress parrts is no longer just desirablejust desirable, but a necessit


The ex-p


ATEX-compliant washing machine 3400-e is0-e is designed to gently and eliably clean even larger quantities of prress parrts, ink pans, doctor blades or buckets The next generation of the basic washing machine model 3400 (seen right,


TEX compliant washingmachine 340


designed to gently and rreliably clean even larger quantities of p ess pa ts, ink pans, doc or blades or buckets. The next generation of the basic washing machine model 3400 (seen right,


bottom) makes do without additional accessories and meets the highest efficiency levels


bottom) makes do without additional accessories and meets the highest efficiency levels.


The closed washing chamber of the 3400-e is loaded thrloaded through the machine’s front doo , which is equipped with a counterweight, and suppleight, and suppliedied with solvent from a separate solvent tank


The closed washing chamber of the 3400-e is ough the machines front doorr, which is


equipped with a counter with solvent from a separate solvent tank


Features in the October issue of


Slitting & Rewinding Drying, Curing & UV Reel & Roll Handling Cutting Systems Sustainable Converting Show Preview – ICE China


Contact Pippa Dugmore


to book your advertising space. Tel: +44 (0)1622 699117


Email: pdugmore@datateam.co.uk www.convertermag.co.uk


intintegrated into the machine. The filling level in the solvent tank is controlled automatically, and the wash program can be controlled manually www


enzmann.


egrated into the machine The filling level in the solvent tank is controlled automatically, and the wash program can be controlled manually. www.dw-r-renzmann.de


exPlateCleaner comes in two sizes:: The model 46 can process plates of up to 440mm width and at least 150mm length, while the model 60 can handle up to 580mm width and at least 150mm length.length. The maximum plate thickness is 3.5mm.


operator is informed via an audio signal and a change in the LED colour of the ON/OFF button. The cleaning progress is also indicated by the colour of the ON/OFF button.


SERVICE ENGINEER


Ashe Converting Equipment Ltd based in Ipswich Suffolk requires a Service/Installation Engineer for our busy International Machine Support Department. Proven experience in a successful machine service/installation environment is important. The successful candidate should be from an electrical /mechanical engineering discipline and will be willing to travel worldwide. We would be willing to offer a relocation package to the right person.


•Knowledge of printing and converting in the packaging/labelling industry is an advantage.


•Ideal applicant will have a working knowledge of machine controls PLCs, A.C. drives, as well as pneumatic control and have good mechanical skills


•Standard hours are 40 hours a week plus overtime. Package includes company vehicle, mobile phone, lap top etc


Please apply in writing with full CV to: Wendy.johnson@ashe.co.uk


September 2016 36


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40