Pressure IndicatorTM
Nip Width IndicatorTM
The Pressure Indicator – nip pressure in Newton/cm2
Featuring the latest nanotechnology, the Pressure Indicator makes rapid measure- ment of nip pressure between rollers possible for the very first time.
As the 5 x 5 mm pressure-sensitive area moves through the nip under pressure, the instrument registers the absolute pres- sure level thousands of times. And the highest value – peak pressure – remains displayed.
Calibration Calibration is easy, just press the control button once.
Calibration of Pressure Indicator High Pressure version at 400 N/cm2
Calibration of Pressure Indicator Low Pressure version at 25 N/cm2
Option – Calibration system The ultimate quality control feature with traceable calibration
The standard Nip Width Indicator instrument self-checks the sensor blade during start-up. If the sensing element has become worn from usage and no longer meets specified performance parameters, a message will be displayed, warning that the blade cannot be used.
Many companies, however, follow quality standards which include measurement traceability.
Nip Control’s new calibration system for the Nip Width Indicator fulfils these demands.
Every calibration unit is checked Substrate labels
In lamination, for example, you may want to measure with a sensor blade having the same thickness as your substrate. If so, use Nip Control’s substrate labels.
Simple handling
1. Let the rollers draw the tip of the sensor blade through the nip Then stop. Nip pressure is displayed instantly
2. Reverse the rollers or lift them apart
3. Adjust the rollers if necessary and repeat measurement
against a reference which is controlled by a “National Com- petent Body” at pre-defined intervals, ensuring that mea- surements are verifiable and traceable according to quality standards.
Simple handling
1. Position the tip of the sensor blade between the rollers
Roll it in or clamp down. The display shows readings in millimeters or inches
2. Adjust nip width to the desired level while keeping the sensor blade in the nip
3. Reverse the rollers or lift them apart
New nano- technology
The Nip Width Indicator – nip width in millimeters/inches Standard system
Choose a 300 mm long sensor blade measuring nip widths up to 20 mm wide or a 500 mm long sensor blade for nips up to 50 mm wide.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121