COMPACT Solvent Recovery Plant Easy and safe distillation
necessary.
Indicating instruments inside the front plate give information about boiling/vapour temperature of the solvent, the process pressure inside the distillation boiler and the nominal/actual values of the heating temperature. The electrical control system monitors all safety-relevant parameters and switches the plant off automati- cally, in case of fault. The automatic filling mode realizes when the dirty solvent storage tank is empty. Then the SIEMENS micro- processor stops filling and switches to the final „sump distilla- tion mode“. During the sump distillation mode, solvent will be evaporated and the remaining residue will be concentrated into an adjustable viscosity. The viscosity depends on the timer setting. Afterwards the machine stops for drainage of the residue, which is easily done through the large front door.
The Ex-proof OFRU distillation unit „COMPACT“ has been de- veloped for daily volumes from 60-400 litres and consists of a thermal oil heated horizontal distillation vessel made of stainless steel, in which the soiled solvent is regenerated.
The COMPACT unit operates fully automatically and fills itself con- tinuously with an integrated membrane pump or with the optional vacuum unit. Every few minutes the machine refills itself and can be used for 24hr operation. During the automatic distillation pro- cess the level in the distillation vessel remains constant, whereas the evaporated quantity of solvent will be replaced by new soiled solvent all the time. That means that a manual filling by hand is not
Typical area of application: 60-160 l / shift EX Class: EX II 2G c T3
ATEX **
The COMPACT is equipped with an internally certificated explo- sion-proof control board. For solvents with a high boiling point of >150°C an optional vacuum unit is available. This option consists of an electrical high performance vacuum pump and generates a vacuum down to –0,95 bar. The boiling points of the solvents are thereby greatly reduced. The heating temperature can be reduced, which saves energy.
The installation and start-up can be carried out easily and quickly by the customer. All connections are placed on one side of the machine.
COMPACT – the dangerous and unhealthy pouring of solvents by hand belongs to the past!
8
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121