ASC-500 50 kW Solvent Recovery Plant
The ASC-Series, one of the most modern distillation plants worldwide, is constructed with a com- pact design, is powerful and very easy to use.
solvent. At the same time a high distillation rate is reached with a small vessel volume. Only an electrical connection is necessary for the integrated steam heating system.
A high-speed vacuum pump transfers the dirty solvent to the evap- orator and guarantees a continuous 24 hour operation. During au- tomatic distillation the quantity of solvents which is evaporated is automatically refilled by small portions again. This automatic pro- cess is adjusted by the timer. Timer 1 "Continuous Distillation": If the set time has passed or the tank of dirty solvent is empty, the plant switches automatically to Timer 2. Timer 2: Final distillation mode "Sump Distillation". The continuous filling is stopped and the remaining solvent mixture in the vessel is evaporated to a thick concentrate. After the time has passed the plant switches off and is ready for the manual or fully automatic emptying.
The distilled and cleaned solvent flows continuously from the distilling plant into a build-lateral tank. A further characteristic of the ASC evaporators is a slow-running agitator with automatic self adjusting scraper blades made out of PTFE. These blades optimally clean the conical evaporator vessel and need no re-adjustment. The total distillation process is controlled by a SIEMENS micropro- cessor.
The ASC-500 is a most comfortable vacuum distillation unit out of the professional series ASC. It includes a modern integrated steam heating system.
A characteristic is the conical distillation vessel made of stainless steel, where the lateral surface is heated with steam. The steam in the double jacket transfers the energy extremely fast into the
Typical area of application: 800-1.800 l / shift EX Class: EX II 2G c T3
ATEX Sample Installation:
■ ASC-500 50 kW with profes- sional OFRU 2000 l stainless
steel tank system 20 **
The emptying of the high-viscosity residue is done by natural grav- ity over a drainage valve at the bottom of the conical round vessel. The plant can be re-filled again automatically with dirty solvent. A new continuous recycling process begins.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121