This page contains a Flash digital edition of a book.
COMPRESSED AIR FEATURE IS YOUR BEKOMAT CONDENSATE DRAIN BEING CARED FOR?


BEKO TECHNOLOGIES says its BEKOMAT condensate drain is the world’s most reliable and the most prolific. However, its reliability means that customers often neglect to undertake the simple servicing requirements. This is fine so long as the drain continues to work; the BEKOMAT is designed to operate for at least one million cycles between each service. BEKO TECHNOLOGIES offers BEKO


Service Direct where BEKOMAT drains are returned for full overhaul comprising: ● Full clean and inspection ● Replacement of all wearing parts including diaphragm, plunger and electrical cover seal ● Pressure and function test ● Final clean and polish ● BEKO service label with time and date of service ● Express carriage back to customer An annual service is recommended. The


BEKO Service Direct price promise means a fixed price for a standard service to all popular drains. The only extras are for further work needed outside the scope of the above schedule. The service aims to: ● Save energy: poorly or non-functioning BEKOMAT could be working at reduced efficiency, wasting valuable compressed air ● Improve air quality: if a condensate drain isn’t working because it hasn’t been


the best value in the long term and serviceability is part of that.


STOP PRESS: BEKO TECHNOLOGIES’ METPOINT OCV monitoring system has been successfully validated from BfArM (German Federal Institute for Drugs and Medical Devices) as a method to determine residual oil content within medical compressed air. In a joint project with a global gas


serviced for years it may not be removing condensate as it should. This can be extremely costly in terms of equipment failure downstream or lost production ● Help the environment by extending the life of existing BEKOMAT drains; the company is using less valuable raw materials and energy making new ones. ● Improve customer confidence: if a drain isn’t working, even though it may be due to years of neglect or abuse, it still reflects badly. BEKO wants all of its drains to look and perform well ● Save customer’s money: if BEKO can service rather than replace that gives better value from the original investment. BEKOMAT drains may not be the cheapest to buy but will always be


The BEKO Service Direct price promise means a fixed price for a standard service to all popular drains


company the companies validated a procedure for monitoring oil vapours in compressed air systems for medical air on the basis of the requirements of the latest version of CPMP/ICH/381/95 and reference measurements obtained with recognised test procedures. All measurements in this process were


obtained using METPOINT OCV photoionisation detectors (PID) from BEKO TECHNOLOGIES. It encompasses threshold monitoring not only of the oil vapours arising during manufacture of the active pharmaceutical ingredient (production of compressed air) but of the filled batches of medicinal products (compressed gas cylinder).


BEKO TECHNOLOGIES T: 01527 575778 www.beko-technologies.co.uk


Official UK & Ireland agents for EKOM


Oil free 10 bar compressors


From 0.5 to 10 kw


100% duty oil free compressors UK stock


/ FACTORYEQUIPMENT


FACTORY EQUIPMENT | NOVEMBER 2015 11


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56