ADVERTORIAL TECHNOLOGY IN ACTION Curtiss-Wright introduces


new 36V AC Traction Controller and extends C3 range of AC Motor Controllers


C HBM


announces contract for phase II of the ITER project


International Thermonuclear Experimental Reactor (ITER) project, as part of a joint agreement with Smartec. The ITER project for fusion is a large-scale scientific experiment that aims to develop a new, cleaner, sustainable source of energy, by producing commercial energy from fusion – the process that occurs at the core of the sun. Successfully awarded as a result of HBM and Smartecs joint experience and ability to supply FBG (Fiber Bragg Grating) technology and Fabry-Perot interferometers to measure strain, displacement and temperature in the cryogenic environment found in the ITER magnets, the tender is one of the largest single orders ever received at FiberSensing.


H


HBM United Kingdom Ltd u 0208 515 6000 u www.hbm.com


enter 806


BM FiberSensing is pleased to announce it has been awarded the contract for Phase II of the


urtiss-Wright Corporation’s (NYSE: CW) Industrial division today announced the addition of a new 36V version of the C3 motor controller to its established


and cost-effective range


The new C3-36V, which will carry the PG Drives Technology name – a long- standing, specialist brand in the supply of electronic controls for floor-care machinery -


is designed for


compliance with international floor- care standards – including EN 60335-2-72.


Operating from a 36V battery supply, the C3- 36V is an advanced, compact, AC traction controller for ride-on cleaning machines. Constructed using UL approved materials throughout and designed to comply with UL 583, the controller is equally suitable for other small, ride-on vehicles operating from 36V batteries.


of


Drives Technology branded AC motor controllers.


PG


enter 807 Simple programming enables the C3-36V controller to be compatible with all types of AC induction


motors. It also accepts multiple throttle and brake pedal types, including 2- or 3-wire resistive and voltage. CANopen hardware is provided as standard, offering vehicle OEMs maximum input flexibility.


To ensure maximum efficiency, the C3-36V uses an intelligent Hill-Hold function that only takes power from the battery if the vehicle starts to roll. As soon as the system detects that Hill-Hold is not required, no further power is consumed. Traditionally, application of a brake switch has been necessary to provide this function.


The new C3-36V controller uses innovative construction methods to ensure reliable and repeatable assembly of the electronic enclosure, resulting in consistent protection of the electronic circuits from the environment and efficient transfer of heat to the baseplate.


Curtiss-Wright u 01202 409409


EFD® 787MS-SS MicroSpray™ Valve B


enter 808 precision technology, MicroSpray™ The new 787MS-SS valve u www.cw-industrialgroup.com


ased on EFD’s proven Low Volume Low Pressure (LVLP)


spray


the new 787MS-SS Valve provides fast,


controlled application of a wide range of low - to medium-viscosity fluids, including solvents, lubricants and UV-cure coatings.


features an


innovative design that uses a small gauge disposable dispensing tip in place of a standard spray nozzle.


This concentrates the LVLP air used to atomize the coating into uniform spray patterns as small as 1,6 mm in diameter - over 60% smaller than standard spray valve configuration.


Benefits include greater process control, faster throughput, fewer rejects and lower production costs.


http://www.nordsonefd.com/emc/ UK-ConnectingIndustry-OnlineAd/ UK-ConnectingIndustry-lp-2015.html


From Conception


to completion……. The complete custom design service from ESI Technology Ltd.


straightforward and you need a tailor made pressure measurement solution to your unique specifications. ESI


W


hatever your application may be, there are times when your


requirements aren’t so


Technology specialise in the design and manufacture of pressure transducers and transmitters. In addition to our standard range of instruments our team of qualified engineers, with extensive experience in electronic, software and mechanical instruments, offer a complete design service using the latest technologies. Sesnor technology, pressure port threads, output


signals, pressure ranges, electrical connections and wetted parts can be adapted to customer requirements.


Stringent quality control and


inspection is exercised at every stage of the manufacturing process to ensure our customers complete satisfaction with the end product, backed up with technical advice and support.


EFD International Inc. u 01582 666334


u www.nordson.com 42 MAY 2015 | DESIGN SOLUTIONS


ESI Technology Ltd u 01978 262255 u www.esi-tec.com


enter 809 / DESIGNSOLUTIONS


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52