FABTECH 2014 Show Preview
Ultra-High-Pressure Waterjet Pumps
KMT Streamline PRO2 pumps feature pressure up to 90,000 psi (620 MPa), at 60 and 125 hp (45 and 93 kW), and of- fer the industry’s most powerful combi- nation of horsepower and pressure with significant advances in uptime, leading
TO PLACE:
Employment, service, new and used equipment, rebuilding, parts & service, scrap metal, agents, business listings, consultants and general admission.
CONTACT:
Marcus Abdullah One SME Drive P.O. Box 930
Dearborn, Michigan 48121-0930 Phone: (313) 425-3262 Email:
mabdullah@sme.org Email:
advertising@sme.org
RATES:
Line Ad. Per line $35 (minimum 5 lines, 7 words per line avg.) No agency commission.
Display ad per inch: 1x: $195 6x: $180 12x: $165 (maximum 2")
Color available, please inquire. No agency commission. Display Ad Units.
to superior productivity. When combined with PRO Line Cutting Heads the KMT Streamline PRO2 pump easily cuts up to 100% faster than traditional 60,000 psi (413.7 MPa) cutting. KMT Waterjet Systems Inc. Ph: 800-826-9274 Web stie:
www.kmtwaterjet.com
(Same as publications rates) Agency commission allowed to recognized agencies.
Payment in advance on all listings.
CLASSIFIEDS PRODUCTS/SERVICES
Visit
www.sme.org/ manufacturingengineering
STATEMENT OF OWNERSHIP, MANAGEMENT AND CIRCULATION required by the Act of August 12, 1970; section 3685, Title 39, United States Code.
1. Date of filing: September 18, 2014 2. Title of publication: MANUFACTURING ENGINEERING 3. Frequency of issue: Monthly 4. Location of known office of publication: One SME Drive, Dearborn, MI 48128 5. Location of Headquarters or General Business Office of Publisher: One SME Drive, Dearborn, MI 48128 6. Names and addresses of Publisher and Editor are: Publisher: Gregory S. Sheremet, Publisher, SME, One SME Drive, Dearborn, MI 48128 Editor: Sarah A. Webster, Editor in Chief, One SME Drive, Dearborn, MI 48128
7. The owner is: SME, One SME Drive, Dearborn, MI 48128 8. The known bondholders, mortgages, and other security holders owning or holding 1% or more of total amount of bonds, mortgages or other securities are: None.
15. Extent and Nature of Circulation
A. TOTAL NO. COPIES PRINTED (net press run) B. PAID OR
REQUESTED CIRCULATION
Avg. No Copies Each Issue
(1) Mailed Outside-County Paid Subscriptions Stated on PS Form 3541 (include paid above normal rate, advertiser’s proof copies, and exchange copies) (2) Mailed In-County Paid Subscriptions Stated on
During Preceding 12 mos. Published Nearest to Filing Date 92,215 88,965
No Copies of Single Issue 90,513
86,818 0
PS Form 3541 (include paid distribution above nominal rate, advertiser’s proof copies, and exchange copies) (3) Paid Distribution Outside the Mails Including Sales
Through Dealers and Carriers, Street Vendors, Counter Sales, and Other Paid Distribution Outside USPS) (4) Paid Distribution by Other Classes of Mail Through the USPS (e.g., First-Class Mail)
C. TOTAL PAID AND/OR REQUESTED CIRCULATION (Sum of 15b (1), (2), (3) and (4)
D. Free or Nominal Rate Distribution (by Mail and
Outside the Mail)
(1) Free or Nominal Rate Outside-County copies included on PS Form 3541
(2) Free or Nominal Rate In-County copies included on PS Form 3541
(3) Free or Nominal Rate Copies Mailed at Other Classes Through the USPS (e.g., First Class Mail) (4) Free or Nominal Rate Distribution Outside the Mail (Carrier or other means)
E. TOTAL Free or Nominal Rate Distribution (Sum of 15d (1), (2), (3) and (4)) F. TOTAL DISTRIBUTION (sum of 15c and 15e) G. COPIES NOT DISTRIBUTED H. TOTAL (Sum of 15f and g)
I. PERCENT PAID (15C Divided by 15f times 100) 0 0
88,965 0 0 0
1,783 1,783
90,748 1,467
92,215 98.0%
16. Total circulation includes electronic copies. Report circulation on PS Form 3526-X worksheet. 17. Publication of Statement of Ownership. If the publication is a general publication, publication of this statement is required. Will be printed in the October 2014 issue of this publication.
18. Signature and Title of Editor, Publisher, Business Manager, or Owner: I certify that the statements made by me above are correct and complete. Gregory S Sheremet, Publisher
www.masterbond.com October 2014 |
ManufacturingEngineeringMedia.com 123 0 0 0
86,818 0 0 0
1,354 1,354
88,172 2,341
90,513 98.5%
��� ����, ���� ������ ����� ��������
EP17HT-3
•Cures in 3 minutes at 300°F •Resists up to +400°F
WWW.PIVOTLOK.COM
When the Job at Hand Requires More than the Two You Have
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156 |
Page 157 |
Page 158 |
Page 159 |
Page 160 |
Page 161 |
Page 162 |
Page 163 |
Page 164