FABTECH 2014 Show Preview
one or more slides linked together via one shuttle element move the semi- finished parts to a second transfer press so that the tonnage, energy and
dimension of the bolsters of both presses can be joined to- gether as if they formed a single press. This means the size of parts being processed in transfer mode may be increased and that parts of the size stamped on G2 lines (blanks up to 2800 × 2000 mm) may be processed. Both transfer presses can work independently of each other. The CNC6-S transfer press with 10 servomotors is designed to increase the flexibility of servopresses by enabling the transfer bars to move separately from one another in any one of three directions: forwards, close, upwards. FAGOR
Ph: 630-920-0422 Web site:
www.fagorarrasate.com
Hydraulic
Quick-Die-Change Systems
Hydraulic quick die change systems from the Hilma Division of Carr Lane Roemheld provide safe, reliable die clamping. The hydraulic quick-change systems
offer faster turnaround, reduced labor costs, and consistent part quality. A broad range of clamps, die lifters, hydraulic circuits, pumps and other products for quick die change will be exhibited.
Carr Lane Roemheld Mfg Co. Inc. Ph: 636-386-8022 Web site:
www.clrh.com
Robotic Fixtureless Welding
Lightweight, fast and com- pact, the new ARC Mate 0iB robot is designed specifically for arc welding applications and can carry a standard welding torch and wire feed-
120
ManufacturingEngineeringMedia.com | October 2014
er on the arm. At FABTECH, the ARC Mate 0iB will run through a torch maintenance station while an LR Mate 200iD/7L robot will pick an auger tooth from an in-process rack, present it to a fixed camera and use iRVision to determine the part’s orienta- tion. The LR Mate 200iD/7L will place it in a re-grip station and grab the part correctly. The two robots will then perform dual- arm motion to simulate hard face welding. FANUC America Ph: 888-326-8287 Web site:
www.fanucamerica.com
Hydraulic Tapping System FlexArm hydraulic tapping sys- tems provide offline tapping up to 2" (51 mm) using a variable two-speed motor. Working range is 20–84" (508–2134-mm) with full 360° movement. The A-32 is a complete turnkey system which includes a reversible
air motor, quick-change chuck and five quick-change tap holders. The benefit to any manufacturer is that they can tap offline, freeing up their CNC equipment and saving valuable time and resources. FlexArm Inc.
Ph: 800-837-2503 Web site:
www.flexarminc.com
Electromagnetic Inspection
New Mentor EM hand-held electromagnetic inspection device integrates testing intelligence into an easily adaptable platform. For the
first time, regardless of skill level, technicians can immediately access the critical information and guidance they need to perform efficient and highly accurate weld, rotary and surface inspections in the most complex industrial environments. Technicians are given instant access to critical information by simply connecting to a local network to share data, imme- diately download up-to-date procedures and workflows and collaborate with Level-3 experts in real-time—all directly from the device. Additionally, reports can be generated on the spot, from the site of inspection. GE Measurement and Control E-mail:
chris.janssens@ge.com Web site:
www.ge-mcs.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156 |
Page 157 |
Page 158 |
Page 159 |
Page 160 |
Page 161 |
Page 162 |
Page 163 |
Page 164