FIRE SAFETY AlarmSense fire alarm panels are EN54 approved
Multi Head Upgrade for Fireray 5000 Advanced Optical
Beam Smoke Detector
separate fire and fault relays for two detector heads attached to a single controller unit. This means that one ground-level unit can control two detector heads but any alarm or fault signal will be located to each specific head. An event device history log has also been added, and power consumption has been reduced even lower than on the original model.
F
Separate relays for multi head Fireray 5000 optical smoke beam detector
Already excellent at reliably detecting smoke across wide indoor spaces and requiring minimal wiring to protect huge areas, having two detector heads on one controller allows even larger spaces to be covered from a single control unit.
Fire Fighting Enterprises Ltd Tel: 01462 444 740 Web:
www.ffeuk.com
enter 810 Scott Safety
ire Fighting Enterprises has upgraded its popular Fireray 5000 optical beam smoke detector with
entec has launched its new range of AlarmSense compatible fire alarm control and indicating panels approved and certified to EN54 parts 2 and 4. Kentec’s Sigma CP-A AlarmSense compatible 2, 4 and 8 zone fire alarm control and indicating panels are designed to deliver significant time and cost savings, compared with standard four-wire conventional systems. An AlarmSense installation can result in a 20-25% reduction in set- up time compared with a standard four-wire conventional system, because all devices in a given zone can be wired to the same pair of
cables.The AlarmSense range allows Apollo AlarmSense devices, including smoke and heat detectors, call points, base sounders, base sounder/beacons and relay units, to be wired to the same pair of cables, with rapid system configuration for common, zonal or two-stage alarm by simply setting one of the panels configuration options.
K Kentec Tel: 01322 222121 Web:
www.kentec.co.uk enter 811
Scott Safety Wins Thermal Imaging Contracts S
cott Safety has announced new contracts to supply its Eagle Attack thermal imaging cameras (TICs) to Cleveland Fire Brigade and Hereford and Worcester Fire and Rescue Service. In total, Scott Safety has supplied 250 thermal imaging cameras to 8 fire and rescue services across the UK in the last 18 months, confirming the company’s reputation for manufacturing high specification, quality products. Both services conducted a fair tender process which involved shortlisted suppliers providing products for physical testing. Fire fighters put the various cameras to the test, awarding merit for ease of use, durability and whether they were fit for purpose. As a result, Cleveland Fire Brigade awarded Scott Safety the tender for 24 TICs. Following a similar process when cameras were tested against a set of mandatory requirements, Hereford and Worcester Fire and Rescue Service also chose to partner with Scott Safety.
Tel:01675 711711 TECHNOLOGY IN ACTION
available from stock now. Sealed to IP66 as standard and with IP67 available on request these enclosures provide a high level of protection for internal components and are ideally suited to meet the demands of controls placed in aggressive and hostile environments. Painted in RAL 7001 as standard and available from stock in 7 popular sizes spanning 125mm x 80mm x 57mm to 260mm x 160mm x 90mm, the range can also be specified unpainted with delivery on short lead times.
Die-Cast Aluminium Enclosures A
Features and alternatives Include: • Material - Aluminium AL SI12 • IP66 as standard • IP67 available on request • Painted RAL 7001 • Unpainted • 7 sizes from [125mm x 80mm x 57mm] to [260mm x 160mm x 90mm] • Customising available
ETA’s Die-Cast aluminium enclosures offer outstanding value over competing brands. ETA Enclosures (UK)
Tel: 01709 386630 Web:
www.eta-enclosures.co.uk enter 813 A
Radiolink Alarm Controller
ico, one of the UKs market leaders in domestic Fire and Carbon Monoxide (CO) detection, has launched an innovative new wireless Controller for its RadioLINK Professional alarms. RadioLINK allows Smoke, Heat and CO alarms to be interconnected using Radio Frequency (RF) signals, eliminating the need for interconnection wiring. As with previous Aico Alarm Control Switches, the new Ei450 Controller allows residents to simply test and silence all the alarms on the system and quickly identify and locate the exact unit which has triggered the system (visually identifying if the source is a fire or CO leak), all from one convenient location. With best practice supporting larger alarm systems, more frequently with CO alarms,
improved control
functions are vital to ensure the system is simple for residents to use.
enter 814 Electrical Engineering SEPTEMBER 2013
Aico Ltd Tel: 0870 758 4000 Web:
www.aico.co.uk
enter 815 35
new range of Die-Cast Aluminium enclosures compliments the Eta Enclosures line up of quality enclosures and accessories and is
Web:
www.scottsafety.com enter 812
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64