ELECTRIFICATION & OLE
Distance relays – how to get
accurate settings?
David Brazier of Omicron explains how its CPC 100 + CP CU1 helps to determine correct impedance values.
T
he results of a false operation of a distance relay can be extremely severe. Non- operation may lead to damage or instability of the system and incorrect tripping leads to unnecessary outages with all the problems that result. A common cause of such problems is the incorrect setting of impedance values of the relay. The positive sequence impedance is relatively easy to calculate because the parameters of the transmission line are known. By contrast, the impedance of the return path through the ground, or zero sequence, is much more difficult to estimate. This is because a typical impedance value is used but the ground is not homogenous and the influence of objects such as pipes, underground cables and rocks can significantly change its value.
CP CU1 makes the difference
As the calculated values for zero sequence impedance are unreliable, a far more effective approach is to measure the impedance of the fault loop directly. Traditionally this would require big mobile generators in order to deliver the power necessary to allow a measurement to be made against interference from the power system. This made such measurements costly and they were rarely performed.
A more elegant approach to this problem is to use the Omicron CPC 100 with the CP CU1 accessory.
This combination allows the injection and Below: Line impedance measurement with CP CU1. Above: CP CU1 with grounding unit.
measurement of values at variable frequencies so that the effects of power system frequency can be eliminated.
As
result this compact, lightweight combination can perform extremely accurate measurements of
a the line and ground
impedances. This provides the data to allow the distance relays protecting the line to be set very precisely with impedance values and the calculated k-factor.
Safety first
To ensure operational safety, the CP CU1 comes with the CP GB1 grounding unit. This unit can divert currents of up to 30 kA if its voltage limit value is exceeded due to unexpected induced potentials on adjacent lines.
In order to guarantee the highest safety levels within and around substations CPC 100 and CP CU1 can also be used to measure the ground impedances inside a substation as well as step and touch voltages on its periphery. This can confirm the effectiveness of the substation’s grounding system.
Company profile
Omicron is an international company providing the electrical power industry with innovative testing and diagnostic solutions. The application of Omicron products gives users the highest level of confidence when making
condition assessments of primary
and secondary equipment on their systems. Services offered in the area of consulting, commissioning, testing, diagnosis, and training make the product range complete.
Customers in more than 140 countries rely on the company’s ability to supply leading edge technology of excellent quality. Service centres on all continents provide a broad base of knowledge and extraordinary customer support.
All of this together with our strong network of sales partners is what has made our company a market leader in the electrical power industry.
FOR MORE INFORMATION
T: +44 (0) 1785 251 000 E:
david.brazier@
omicron.co.uk
74 | rail technology magazine Jun/Jul 13
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100