F OR E S T RY CU T T ER 37
OPTIONS & ACCESSORIES Increases efficiency with faster start up and recovery times. Additional power is provided to the drum when mulching material on the ground.
Front Gate: Lowering the optional front gate reduces front discharge of material and promotes longer process- ing into finer mulch. The gate can be quickly added to any Bobcat forestry cutter.
overgrowth to shreds.
LOW NUMBER OF TEETH Provides fast knockdown of trees and low-cost replacement.
PRESSURE GAUGE Visible from the seat to help the operator run the attachment at peak efficiency.
SAFETY CHAINS Reduce debris thrown to the rear.
SPIRAL TOOTH PATTERN Allows one tooth to engage at a time for smoother operation and less horsepower demand.
COUNTER COMBS Provide the ability to do fine mulching, and provide wear protection for the rear of the housing.
ROTOR BRAKE Stops from full speed in 10 seconds or less when the forestry cutter’s hydraulics are deactivated.
DOUBLE-TIPPED CARBIDE TEETH Efficiently rip through hard and soft woods, providing long life and uptime protection for the attachment.
ADJUSTABLE PUSH BAR Has three positions to accommodate the operator’s preferred setting. Gathering feature pulls brush and trees towards the center of the drum.
bobcat.com/forestcut
A B
Specifications Overall width (A)
Cutting width (B) Height (C)
Length (D) (push bar in rear position)
Operating weight
Operating weight w/ front gate
Number of Teeth 50-inch
50-inch 2-speed
D C Forestry Applications Kit
Designed to protect you and your investment in the must be installed on the loader to operate the forestry cutter.
A Forestry Door (0.75-inch laminated polycarbonate)
B Front and Rear Light Guards C Hydraulic Quick Coupler Guard
E Level II FOPS (meets ISO 3449)
F Muffler Guard G Engine Compartment Seal Kit
Scan the code to see the forestry cutter in action.
60-inch
60-inch 2-speed
62.1 in. (1577 mm) 62.1 in. (1577 mm) 73.3 in. (1862 mm) 73.3 in. (1862 mm) 50.0 in. (1270 mm) 50.0 in. (1270 mm) 60.0 in. (1524 mm) 60.0 in. (1524 mm) 59.9 in. (1521 mm) 59.9 in. (1521 mm) 59.9 in. (1521 mm) 59.9 in. (1521 mm)
47.7 in. (1212 mm) 47.7 in. (1212 mm) 47.7 in. (1212 mm) 47.7 in. (1212 mm) 2185 lb. (991 kg)
2176 lb. (987 kg)
2287 lb. (1037 kg) 2218 lb. (1006 kg) 24
24 Continuous use
Intermittent removal Occasional removal
2364 lb. (1072 kg) 2234 lb. (1013 kg) 2497 lb. (1132 kg) 30
2367 lb. (1074 kg) 30
Tree Diameter (Maximum)
4-5 inches 7-9 inches
10-12 inches
Approved Machines: Skid-Steer Loader, Compact Track Loader, All-Wheel Steer Loader Forestry Applications Kit required.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96