This page contains a Flash digital edition of a book.
BUSINESS RESOURCES + TOOLS | TOOL CRIB |


Plastic pipe fitting reamers now in smaller sizes


Reuse existing fittings with ease by utilizing this time saving solution for retrofit work. PPR Fitting Reamers (for up to 4" fittings) are now available for 3/4" and 1" PVC and CPVC fittings. PPR Fitting Reamers clean out the old or broken pipe and leftover solvent cement from a fitting so it can be reused. Using a drill, install the reamer and neatly drill-out the fitting. In addition to the new sizes, Manufacturer offers a full kit (PPRK6) of all six reamer sizes. PPR reamers fit standard drills, cordless drills, or impact drills.


REED MANUFACTURING COMPANY e Circle 120 on reader reply form on page 111


106


Thaws frozen pipes faster


Hydraulic benders


Manual Hydraulic Benders are designed for precise cold bending of standard gas pipe (DIN 2440), black steel schedule 40 (ASTM A53) pipe and stainless steel schedule 40 pipe. Bending angle indicators show, in real time, the angle the pipe is bent to, reducing the number of starts, stops and pipe removals to take measurements. The durable piston seals prevent premature leaks and maximize uptime. User fatigue is reduced by the unique design of the handle, which minimizes the number of strokes to advance the piston and requires less effort per stroke. The benders’ single-circuit hydraulic system with a return spring provides better control of the ram.


RIDGID


e Circle 121 on reader form on page 111


The Hot-Shot 400™ pipe thawing machine thaws frozen pipes in just minutes. It eliminates tearing up floors, breaking through walls, or digging around pipes in frozen ground. The powerful Hot-Shot 400 has a dual level output. With 400 amps of thawing power, it can clear frozen lines up to 175 ft. long in 11/2" diameter lines. If you're stuck on a job with only a 15-amp breaker, you can switch the Hot-Shot down to 320 amps and pull just 14 amps.


Presented by TOOL OF THE MONTH


Powers up the job site


The new ENERGY STAR rated M18™ & M12™ Multi-Voltage Charger (48- 59-1812) will charge all M18™ and M12™ LITHIUM-ION batteries sequentially, allowing the user to put both packs on the charger and walk away confident that they will be ready for their next job. The new Multi-Voltage Charger will be included with the M18™ FUEL™ Drill Driver and Hammer Drill Driver, sold as an optional accessory and will also transition into several M18™ kits throughout the year. The new unit will charge M18™ or M12™ compact batteries in 30 minutes and extended capacity (XC) batteries in 60 minutes.


GENERAL PIPE CLEANERS


e Circle 122 on reader reply form on page 111


MILWAUKEE TOOL CORPORATION e Circle 123 on reader reply form on page 111


phc december 2011 www.phcnews.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116