Spider Crane Improvements
Maeda, represented in the UK by Kranlyft, has updated two of its spider cranes. The 8.7m lifting height MC285CWM-E-3 now has adjustable
outriggers to better enable working in tight spaces. It also comes with a 7-inch display monitor with slew limit setting and full HBC radio remote control. Its Yanmar diesel engine meets Stage V requirements. For indoor use, the crane is fitted with a power pack which runs off a three-phase supply. However, this can now be removed when not required, reducing the machine’s transport weight. Maeda has also
updated the look and feel of the larger MC305CRM-E-3, along with fitting a Stage V compliant engine. It retains its maximum lifting height of 12.5m.
01179 826661
www.kranlyft.com Telehandler Range Extends
With the addition of 7m and 8m models, Bobcat now offers a choice of 13 rigid frame telehandler models for applications in construction, rental, recycling, waste and general industry, covering maximum lifting capacities between 2.6 and 4.3 tonnes with lifting heights from 6m to 18m.
Improved Vacuum Lift
Winlet, represented in the UK by Hird, has introduced a replacement to its 350 model. The new Winlet 400TL has better rough terrain capabilities and enhanced hydraulic functions compared to the 350. It can lift horizontal from ground to heights of more than 1m, enabling lifting of glass on and off work benches and tables. Winlet Vacuum Robots are used for lifting all types of airtight
products including glass, plastic, cladding, steel sheets, concrete, marble. Improvements in the 400TL include the ability to use more than one function at once, enabling more precise positioning; as well as the addition of hydraulic side shift and rotation. Hird has added several new units to its own hire fleet, coinciding
with the opening of its West Midlands depot in Halesowen. 01482 227333
www.hird.co.uk 09/04/2020 13:32 Page 1
The new TL43.80HF increases the lift capacity in the Bobcat
range to 4.3 tonnes, combining this with a maximum lift height of almost 8m. Bobcat says the TL43.80HF benefits from high stability due to the box welded frame, low load centre, long wheel base and new, larger rear counterweight. This has enabled Bobcat to minimize the overall dimensions of the machine, resulting in a width of only 2.3m and a length of less than 5m from the rear to the fork face. Combined with a tight turning radius of 3.71m, it is ideal for working in confined environments.
www.bobcat.com/eu 23
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36
