This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Light sensor Pi2Go £117.95 IP address display Access to the USB ports Line following sensors Ultrasonic sensor
You may already have some of the components of the TTS Pi2Go in your classroom, therefore we have selected two kits for you to choose from depending on what resources you already have.
Our Basic Kit assumes you already have a Raspberry Pi, a means of being able to connect to Pi2Go and some batteries to be able to power it.
Basic kit:
■ Pi2Go robot ■ Micro SD card and adapter (pre-loaded with Pi2Go software)
Additional components are also available to make up your kit if you are only missing one or two things!
Additional components:
■ Raspberry Pi Model B + ■ WiFi dongle ■ 4GB USB Memory Stick
Pi2Go Basic Kit INT-EL00494 £ 117 .95
Raspberry Pi Model B+ INT-IT01060
£39 .45
WiFi Dongle INT-IT01065
Our Ultimate Kit, as the name suggests, is the kit for you if you want a kit which has everything you need to get Pi2Go roaming around in your classroom.
Ultimate kit:
■ Pi2Go Robot ■ SD Card (pre-loaded with Pi2Go software) ■ Raspberry Pi Model B+ ■ WiFi Dongle ■ 4GB USB Memory Stick
■ Rechargeable AA batteries X 12 (Including 3 charging units so you have 2 lots of batteries, charge one set whilst you use the other!)