Focus on Embroidery YES Ltd The best machine on the market?
ʻThe best machine on the marketʼ. This cannot be the first time that you have heard this statement and it surely cannot be the first time that you have thought with that air of doubt that tends to accompany such utterances, ʻyeah, sureʼ. However, the team at YES Ltd still stand by the statement and, in the next few paragraphs, hope to explain why.
All embroiderers want the same thing – profitability. Itʼs what we all want from our
businesses otherwise there is no point in being in business in the first place. But we all also want, wherever possible, flexibility. If you can maximise the use of a piece of equipment that has cost your company thousands of pounds then the investment is more worthwhile and will show a positive return in a shorter time. YES firmly believes that the SWF Dual Function machines can achieve that goal so letʼs look at some of the facts.
One of the first questions that many people are prone to ask is “how much is it?” when what they should be asking is “how much can it make for me?” This is where the Dual Function shows its first, and major, advantage over other machines on the market because it literally can make more money for you than any other machine.
Why? Because it can do what no other machine can do which is to embroider two different designs and/ or products at the same time and this gives you maximum flexibility in the way that you plan your production. Using the example of a Dual Function six head (3x3) you could, for instance, run three caps and three T shirts at the same time. Even if you could do this on other machines, which you canʼt, you would still have the problem of the design. In most cases you should not use the same digitised design for both knitwear and woven caps. Even if it is the same design graphically, the digitisation for each product is different.
SWF Dual Function
On a SWF Dual Function, you have two independent control systems, one for each bank of heads. This is what the machine was designed to do. There are other benefits. Letʼs take the scenario of getting to the end of an order and, on the final run, you only have two garments left to embroider. On a standard six head machine you have no choice but to run the machine with four heads switched off wasting time and productivity. With a six head Dual Function machine you can run the final two garments on one bank while starting your next order on the other bank of three. So instead of running the machine at 33.3% capacity you are now running it at 83.3%. More than doubling the productivity of that machine for that run. This also has a major benefit when sewing problems occur or when a sewing head runs out of underthread. On a standard machine the whole machine stops while you fix the problem on that head. With the Dual Function only half the machine stops meaning that, even during a problem, the machine is still running at 50% capacity. Because of these advantages YES Ltd can state quite categorically that SWF Dual Function machines are more productive than any standard embroidery machine. Is the SWF Dual Function the best machine on the market? The team at YES Ltd think it is!
www.yesltd.co.uk
AJS Embroidery Services New Tajima TMBR-SC1801 18 colour, one head embroidery machine
The next-generation Tajima TMBR-SC1801 is a new model which is the first 18 colour machine from Tajima and it is also the first pickerless trimming machine from Tajima. This new model features a digitally-controlled presser foot (DCP), network access, and a slim cylinder design for easier access. The reinforced wide cap frame has enhanced the embroidery stability whereby increasing the rotational speed to 1000rpm.
What is DCP? DCP is an abbreviation for digitally controlled presser foot. The machine can embroider on very thin to thick material or seamed sections without
fluttering. DCP keeps embroidery quality high while reducing broken needles, thread breakage and skip stitching, etc.
Fine Stitch mode
Fine Stitch (FS) is a special mode that provides stability and creates a high quality of embroidery that makes it easy to sew with hard-to-embroider threads.
Design position adjustment Another great new feature is the design position adjustment which allows you to simply and quickly align the design to a parallel line. No need to reposition pockets etc. simply align the design to the level of the pocket in the frame.
Are your machines networked?
Autograph and DG/ML by Pulse are recommended as this software simplifies the process of personalisation and allows for the smoothest design data generation and transmission to the machine. Simply open a design and send or pull the desired design to the machine by simply scanning a barcode. The design will go straight to the massive on board memory and have the start position and the colour sequence and much more data already set. Scan and sew in seconds!!
www.asjemb.uk Tajima TMBR-SC1801
| 70 | September 2019
www.printwearandpromotion.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92
