The DTF Column
Seven rules for a file that won’t let you down
To ensure your prints are flawless, it may be worth looking beyond the physical print. Sometimes all problems can be solved before you even send the job away by making sure all settings are right in the creation software. Beppe Quaglia, CEO and founder of Virus Inks, explains.
W
hen a DTF print comes out wrong, the machine is almost always the first suspect. But anyone who works with this technology every day knows the most delicate part of the process begins much earlier, at the screen. A badly prepared file gives no machine a fighting chance, however well calibrated it is. Here are the seven rules that really make the difference between a file that’s ready for production and one that will come straight back.
1. Work at actual size, at 300 DPI
The first mistake is rarely about printing – it’s about canvas setup. Many files reach the right resolution on the designer’s screen but are calculated at a size that differs from the final print size. Set the garment’s exact dimensions before you start designing, not afterwards: Enlarging a smaller file at the export stage always produces blurred edges and lost detail, no matter how good the printer is.
2. Transparency must be real, not simulated Hiding a layer or filling it with white is not the same as making it transparent: To the RIP, that white is a genuine command, and the result is a rigid, unattractive block rather than a clean background. Always check that the alpha channel reads 0%, not how it looks on screen – this is the single most common reason transfers get rejected at first inspection.
3. Anti-aliasing is your silent enemy The soft edges software applies automatically to smooth contours on screen contain semi-transparent pixels. The RIP reads these as areas to cover, producing that faint white halo often visible on dark substrates. Crisp, clean edges, free of unintended fades at the margins, stop the problem at the source.
4. Understand how the white under base is generated In most workflows, the white underbase is generated automatically by the RIP beneath every coloured area. It’s rarely created by hand, but it does need to be understood. A slight choke of 1–4px prevents a minor registration shift between the colour layer and the white layer from leaving a thin white line at the edges. Applying it automatically across the whole file, however, risks losing fine detail and small text: It needs to be calibrated, not set once and forgotten.
5. Colour space is not what you see on your monitor Designing in RGB and trusting what appears on screen almost always leads to disappointment once printed. The
www.printwearandpromotion.co.uk The four places for transfers
file must be converted into the colour space your RIP works in, with the correct ICC profile embedded – only then do oranges, bright greens and deep blacks stay faithful from screen to substrate. If that profile isn’t already documented in your workflow, get it from your pre-press or production team before starting the job. This is information that should circulate internally, not be reverse-engineered by trial and error on every file.
6. Vector where precision matters, raster where detail matters
Logos, text and geometric shapes should stay vector for as long as possible, with fonts converted to outlines before export, to guarantee crisp edges at any size. Photos and gradients remain raster but should be handled with dithering to avoid visible colour banding across gradual tonal shifts – a detail that separates an amateur file from one that’s genuinely production-ready.
7. Hand the machine a clean file, in the right format High-resolution transparent PNG, or PDF/TIFF for more complex jobs, remain the most reliable standards – JPEG, with its compression, should never be used as a final file. Crop the design tightly, with no unnecessary margins, to make the best use of space on the gang sheet, and always pass the file on with its dimensions, DPI and underbase notes attached: When the production team receives this information upfront, they generate fewer rejects – and turn the job around faster.
The quality of a DTF transfer is decided largely before printing even begins. Spending an extra 10 minutes on file preparation costs far less than a batch rejected after the first wash.
October 2026 | 47 |
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76
