The Embroidery Column
The pitfalls of embroidery on babywear
any embroidery companies are totally oblivious regarding the
regulations for babywear and childrenswear. This even overlaps into nightwear for all ages. Information regarding these standards can be found on EN 14878:2007. Several test methods are used such as, BS 5438 and BS 5722 and others. The situation becomes more confusing when garments are used as play clothing, which then falls under BS EN 71-2. This includes embroidered teddy bears and fancy-dress costumes. All such clothing and other products must be marked in red ‘Keep away from fi re’. Your supplier should be able to provide you with correct guidance when you purchase such items for decoration. Take a few
www.printwearandpromotion.co.uk
and children’s clothing M
minutes and have this conversation with them. A reputable supplier will have already carried out such tests on your clothing and soft toys etc. The simple rule of thumb is that ‘items made wholly of synthetic substance which melts without decomposing or burning are taken as complying; without performing a test’.
Comply with the regulations Simply, this means if you use 100% polyester embroidery thread it will melt and not burn. It is no use ignoring your underthread as that must also comply. The same goes for your embroidery backing. Many people will use a viscose or viscose blend backing which will fail as it burns. The most suitable embroidery backings to use would be our Waffle backing which is made of 100% synthetic
In this month’s Embroidery Column, Jas Purba, managing director of ETC Supplies, outlines the regulations you should take into consideration when embroidering clothes for children.
substance or any heat soluble or water-soluble films.
When you buy such consumables, it is your responsibility to check each batch for suitability of use. Get this wrong and not only will you have trading standards chasing you, but if your product causes an injury, you could be liable for more serious proceedings.
How are these items tested? Generally, the sample is mounted vertically, and a gas flame is applied to the face of the sample for 10 seconds. This can change depending on what BS test is being performed.
If this is your main business, it may be worth speaking to a specialised consultancy who can help you comply with the regulations.
April 2022 |53 |
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92
