PHAM NEWS | OCTOBER 2026 Tools & Workwear 31


Making restoration work easier


Flir has integrated its professional iXX-Series thermal imaging cameras with RocketPlan, a mobile platform for the property restoration industry. The integration transfers thermal data directly into digital field workflows, helping professionals document moisture damage and structural anomalies. Images captured using the iXX-Series, Flir ONE and


Flir Edge are automatically synced to the relevant job file, with project, room and timestamp information attached. This removes the need for manual file transfers and reduces the risk of images being lost or incorrectly labelled. Technicians can combine thermal images with floor


plans, moisture readings and time-tracking within RocketPlan, while office teams can use the information to produce reports for insurance partners. ◼ phamnews.co.uk/1026/59


Flexible solution will help keep spaces dry


Get more done with every single charge


The M18 High Output 5.0Ah battery range from Milwaukee is designed to deliver increased productivity, durability and efficiency across the M18 platform. The batteries run cooler and can provide up to 50% more work in medium and high-demand applications compared with the M18 B5 under the same test conditions. Compatible with the M18 range, the packs can reach


80% charge in 28 minutes and full charge in 39 minutes using Milwaukee Super Chargers. Latches are designed for easy operation with or without gloves, while an onboard fuel gauge remains readable in direct sunlight. The new battery has a chemical-resistant housing to


protect against oils, solvents and greases. ◼ phamnews.co.uk/1026/60


Needle nosed for precision grip


For restricted spaces, the KNIPEX Long Reach Needle Nose Pliers (28 71 280) and (28 81 280, pictured) provide extended access without compromising grip or control. Both feature a head and jaws for


work behind cladding. Milled grooves at the half-round tips hold sensitive components such as small-bore copper pipe, plastic screw joints and cable, while serrated sections provide a firm grip on tougher parts. The 28 81 280 has a 45° angled tip for


awkward angles. Both are forged from oil-hardened special tool steel and have plastic-coated handles. ◼ phamnews.co.uk/1026/62


Stands up to hard wire cutting


The Diagonal Cutting Pliers from Maun Industries are designed to cut hard wire with less effort, using a compound-lever mechanism that multiplies hand force by up to 25 times. This can reduce fatigue during repeated cutting tasks in engineering, electrical, maintenance and industrial applications. The cutting jaws are induction


hardened to HRC 64 for durability and edge retention, while machined cutting edges provide clean, consistent cuts. A corrosion-resistant finish supports use in demanding environments. Available in 140mm and 160mm sizes, the range includes steel handles,


PVC comfort grips and fully insulated 1000V models certified to IEC 60900:2018. ◼ phamnews.co.uk/1026/63


1918F1-0


INTERCHANGEABLE 13MM DRILL CHUCK HEAD


1918F2-8


INTERCHANGEABLE 13MM DRILL CHUCK HEAD


1918F4-4


INTERCHANGEABLE 13MM DRILL CHUCK HEAD


1918F6-0 ANGLE ATTACHMENT FOR INTERCHANGEABLE HEADS


MAKITAUK.COM | @MAKITAUK | @MAKITAUKOFFICIAL 10.26 New LXT Drill Driver.indd 1 17/09/2026 11:42 4 1 2 3 LXT®


DRILL DRIVER


18V


With the addition of Vario- Collect 8 and Vario-Collect 20, REMS has added two flexible collection systems to its range of products for controlled collection of leaking liquids during repair and maintenance work on pipe systems. The kits are suitable for water, oil and liquids containing glycol with a pH value of 4 to 9.5 and temperatures up to 60°C. Formable metal bands allow


optimum adaptation to confined or difficult-to-access places. The robust components made of fibre-reinforced PVC support clean work procedures and reduce contamination as well as consequential damage at the application site. The Vario-Collect 8 Set has a


flexible collection tray with a filling capacity of 8 litres and a rubber sealing lip, a drain pipe with integrated neodymium magnet for targeted drainage of liquids as well as a flexible rose fitting for secure positioning


around a pipe. The set comes in a practical, water-resistant transport bag. The Vario-Collect 20 Set is


equipped with a flexible, round collection vessel with a capacity of 20 litres, an integrated drain nozzle with a quick coupling, and silicone hose for controlled emptying as well as adjustable carrying straps for transport and hanging. ◼ phamnews.co.uk/1026/61


DDF491


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40