COLOUR ENHANCER Solvent-Free, Coloured Solution
Designed to enhance coloured concrete, block paving, paving slabs, walling and roof tiles and protect from water penetration, oil or grease spillages and dirt/grime build-up.
Application: Colour Enhancer will enhance the present colour and extend the lifespan of the treated surface. It will also help to inhibit organic growth and is a solvent-free formulation, so has a low odour. UV resistance is also improved as a result of coating surfaces with this solution.
This product is ready to use and does not require dilution. Simply apply using a brush or a lambswool roller. Please refer to the Technical Data Sheet for full application details.
Only use in conjunction with other Bond It Drive Alive products. Please note, Colour Enhancer is not suitable for use on patterned or imprinted concrete surfaces.
Coverage is approximately 25m2 /4L. Code
BDCEBR4 BDCEBU4 BDCER4
BDCEGR4
WIDE GAP JOINT-FILL All-Weather, One Part Paving Compound
A single component, ready-to-use joint filling system for the simple and rapid pointing of paved areas with joints over 5mm wide and 25mm deep. This is a unique blend of polymers and aggregates which blend together chemically on exposure to the atmosphere, forming a stable, solid mass which remains permeable and allows rain water to pass, reducing puddling. Can be used inside and outside.
Application: compatible with most types of paving including natural stone, terra-cotta, clay, concrete and cobble stones. Simply brush into the joint, compact down and leave to set. Not suitable for “v” shaped joints.
For coverage details, please see Technical Data Sheet. Code BDJC15
BDJC15GR BDJC12BL
Colour Buff
Grey Black
Size 15kg
12kg 12kg
Box Barcode 1
1 1
5060021364845 5060021367099 5056437400826
Colour Brindle
Buff Red
Charcoal
Size 4L
4L 4L 4L
Box Barcode 1
1 1 1
5060021367075 5060021367051 5060021367068 5060021367020
POT HOLE REPAIRER Cold Lay, Asphalt Repair Compound
A specifically designed solution for use on roads, pavements and car parks. Fully compatible with the existing road surface, Pot Hole Repairer is instantly traffickable in wet, freezing and hot conditions.
Application: easy to use, no water or mixing is required. This solvent-free formulation contains bitumen, and can be applied to pot holes at depths of up to 100mm in a single application.
Greater depths can be achieved using a layering method, and the finished surface offers a high skid resistance.
Coverage is approximately 1m2 Code BDPHR25 x 15mm (compacted).
Colour Black
Size 25kg
Box Barcode 1
5060021369093
01422 315301
75
DRIVE ALIVE: Concrete Revival Products
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120
