DUSTPROOFER & HARDENER Premium Quality, Low Viscosity Concrete Sealer
A high quality, chloride-free, low viscosity liquid which permeates and chemically seals concrete. It produces a hard wearing, non-dusty surface suitable for garage, warehouse, factory and workshop floors and is suitable for both internal and external use.
Application: apply as a uniform, thin coat to the surface, brushing in well and not allowing the liquid to puddle. Once this first layer has cured (normally overnight), apply a second coat. Very porous surfaces may need further applications. After the last application, leave for 24 hours to fully dry and then wash down - do not wash down before 24 hours after last coat.
Do not use this product on masonry or coloured concrete. Very dense, power-floated floors may not permit effective penetration.
Coverage is approximately 3-5m2 Code
BDH090 BDH091 BDH092
MOULD STOP Powerful Mould-Removing Cleaning Agent
A premium grade, powerful cleaning agent formulated to remove mould, mildew, organic growth and lichen, etc. which is suitable for both internal and external applications.
Application: ideal for use around the home, in the garden, in caravans, boats, public walking areas, farm yards, kennels and stables. Mould Stop removes all types of organic green growth, algae, etc. from brick, stone, roof tiles, corrugated iron, lead, built-up felt, concrete, wood, tarmacadam, painted surfaces, decking, garden furniture, paviours, plastic and glass. It can also be used on fabric awnings.
Mould Stop is formulated to be used undiluted either by spray, soft broom, paint brush or watering can. Apply and leave for a few days for the liquid to dry and achieve full strength. Algae growth is prevented for many months after application.
Coverage is approximately 15m2 HSE Approved: No. 9828
Code
BDH071 BDH073
BDH070 BDH072
Colour Clear
Clear Clear Clear
/L.
Size 1L
2.5L 5L
25L
Box Barcode 12
4 4 1
Colour Clear
Clear Clear
/L.
Size 5L
25L 200L
Box Barcode 4
1 1
5060021361301 5060021364173 5060021364197
5060021364517 5060021367310
5060021362346 N/A
STABILIZING SOLUTION Water-Based Bonding & Priming Agent
A white, ready-to-use, water-based treatment for bonding and priming surfaces prior to painting and decorating. This product stabilises poor surfaces, seals and binds chalky or weathered areas, gives a sound base for decorating and is quick drying.
Application: a treatment for surfaces which are old, weathered, chalky or porous. Stabilizing Solution can be used on most substrates (even damp surfaces) including concrete, cement, plaster, plasterboard, renders, pebble dash and MDF, etc.
Do not apply when the temperature is below 50 Coverage is 6m2
/L. Code BDH130
Colour White
Size 5L
Box Barcode 4
C or when rain or frost is imminent.
5060021364777
01422 315301
47
BUILDING CHEMICALS: Chemicals & Cleaners
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120
