LIQUID MORTAR PLASTICISER Extra Strength Additive for All Portland Cements
A chemically balanced plasticiser based on synthetic air entraining agents which is designed to improve the workability of bricklaying and plastering mortars.
Application: increases the resistance to freeze-thaw cycles and reduces the risk of cracking and crazing and removes the need for lime when added to a cement mixture. Available as either a red or brown liquid, simply add to the cement mix.
Dosage rate: approximately 100-150ml/25kg of cement. Conforms to EN934-3 (2009) + A1 (2012)
Code See also Power Mix, page 45.
BDH010 BDH011 BDH012 BDH015 BDH016 BDH017
Colour Red
Red Red
Brown Brown Brown
Size 5L
25L
200L 5L
25L 200L
INTEGRAL WATER RESISTANT PLASTICISER Plasticity Improver for Mortars & Renders
A high strength cement waterproofer which improves workability and plasticity of concrete and mortar in the wet state and resists water penetration, even under pressure.
Application: suitable for internal and external rendering, roof screeds, swimming pools, tanks, retaining walls, basement walls and reservoirs. Available as a either a pink or green liquid, simply add to the gauging water.
Dosage rate: approximately 0.25-0.5L/25kg of cement. Conforms to EN934-3 (2009) + A1 (2012)
Code
BDH020 BDH021 BDH022 BDH200 BDH201 BDH202
Colour Pink
Pink Pink
Green Green Green
Size 5L
25L
200L 5L
25L 200L
Box Barcode 4
1 1 4 1 1
5060021361165 5060021361172 5060021364210 5060021362452 5060021362469 5060021362476
Box Barcode 4
1 1 4 1 1
5060021361141 5060021361158 5060021364227 5060021364722 5060021364739 5060021364746
See also Power Proof, page 45.
FROSTPROOFER & HARDENER Protection for Bricklaying & Rendering at Low temperatures
A high performance building chemical that increases frost resistance and accelerates the setting time of cement by improving the rate of hydration.
Application: specially developed for bricklaying and rendering at low and sub-zero temperatures, when added to the mix this product will improve workability and increase strength gain and resistance to water penetration. It allows up to 15% reduction in gauging water and can also reduce curing times and shrinkage. Frostproofer will not degrade steelwork or wall tiles as the formulation is chlorine-free.
Simply add to the cement mix and reduce the amount of gauging water as appropriate (max reduction is 15%). At temperatures below 40
C the use of hot water is recommended.
Dosage rate: approximately 1.5-2.25L/25kg of cement. Conforms to EN934-2 (2009)
Code See also Power frost, page 45.
BDH030 BDH031 BDH032
Colour
Light Blue Light Blue Light Blue
Size 5L
25L 200L
Box Barcode 4
1 1
5060021361189 5060021362391 5060021364203
44
www.bond-it.co.uk
BUILDING CHEMICALS: Chemicals & Concentrates
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120
