Electronics Industry Awards

Cochlear Implant quick disconnect connector – a custom design with life enhancing benefits

Roy Phillips, managing director, Intelliconnect (Europe) Ltd


cochlear implant, often referred to as a bionic ear, is a surgically implanted device that enables a

severely deaf person to hear again. The external transmitter, where a connector is required, transmits RF signals through to the implant via a magnetic connection to reduce the possibility of patient infection. The transmitter processes the RF signals from the microphones through a speech processor and then into the internal implant which connects to the cochlear allowing the person to “hear” the sound. After suffering failures of standard connectors, a major manufacturer of cochlear implant technology approached Intelliconnect with a request to develop a quick disconnect waterproof connector that would be suitable for use in such a medical system application. The proposed connector was to be in

the external transmitting/processing part of the device and needed to be extremely rugged and reliable. Latest estimates of the number of people

with implants fitted is close to 200,000, with the reliability of all components expected to be in excess of 99.5 per cent. High reliability, fast turnaround custom designs and exceptional customer service

were among the reasons that led the customer to approach Intelliconnect to create this new connector. The custom designed connector had

to be waterproof, as the connectors were used close to the skin, and had to be able to be used in normal domestic environments such as swimming pools, showers, baths and high humidity environments such as saunas, steam rooms etc. The design had to be small enough to fit into the transmitter equipment, but still rugged enough to allow a push/pull connection style to be incorporated. The brief required a new design of connector to be initiated, as two important features, namely; waterproof integrity and a push pull connection rather than a coupling nut, were required to allow ease of use and performance under severe environmental conditions. The design was based around a modified MCX connector, with the waterproofing rating of IP68 in the unmated condition. This is the equivalent of 10m immersion in water, tested for a minimum period of four hours. (In fact, the connector has been tested to way beyond this level, 60m without leaking thus ensuring a safety factor of six).

The application required

several thousand disconnects during the product lifecycle, and this meant a development programme needed to be undertaken to ensure the latching mechanism, spring forces and engagement and separation forces be consistent and qualified for the specified number of mating and unmating cycles. This was finally tested to 3000 cycles, and the performance of the connector verified to be within the specified limit after the full life cycle testing. Other requirements

that were subjected to a full qualification test programmes included: A very wide-ranging temperature envelope, giving sufficient safety margins for any eventuality - the temperature envelope being defined from -65ºC to +165ºC to ensure full operation with a significant safety margin (to increase reliability) over a wide operating temperature range. The operating frequency range of DC

to 6GHz enables all transmitted signals to be fully processed without any subsequent signal degradation. Insulation resistance of 5 Mohm allows

for any moisture or humidity to be present without compromising safety or performance of the device. The voltage rating 335v RMS gives a

large engineering safety factor within the connector design so that any fault condition can be safely dealt with. VSWR 1.3 allows for the signals to be

processed without any degradation or deterioration and produces the best possible signal clarity. To allow the external components to

be regularly serviced, the connector needed to be capable of up to 3000 mating cycles, and this was achieved by fine tuning the connector forces to an engagement force of 2.5lbs maximum and 1.5lbs minimum, and a disengagement force of 3lbs maximum and 2lbs minimum.

28 May 2019 Components in Electronics

The successful design is now in volume

production, improving the quality of life of both adults and children, and in the case of children in particular allows for normal schooling and participation in the hearing world - all thanks to a miniature waterproof RF connector! Intelliconnect is the largest UK based manufacturers of RF and waterproof connectors suitable for applications including wearable technology, medical, telecoms, satcoms, military, aerospace, space, general microwave communications, rail traction, oil and gas and marine. Intelliconnect also manufactures cryogenic connectors, the Pisces range of waterproof RF connectors, coaxial adaptors to facilitate inter-series connection and gender change etc, dust-caps and offers value added services including cable assemblies. Intelliconnect has been awarded silver performance standard to the SC21, aerospace, defence, security and space industry, supply chain programme and is an accredited living wage employer.

Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60