New Power-Supply Transformers Complement Power Integrations’ SCALE-iDriver Gate-Driver IC Family

Now at Mouser: NXP i.MX 8M Mini Processors for Edge Computing and Machine Learning


ouser Electronics, Inc., the New Product Introduction (NPI) leader empowering innovation, is now stocking

the i.MX 8M Mini applications processors from NXP Semiconductors. NXP's first embedded multi-core heterogeneous applications processors built using advanced 14LPC FinFET process technology, the i.MX 8M Mini offers high-performance computing, power efficiency, and embedded security for edge node computing, streaming multimedia, voice assistants, human machine interfaces (HMIs), and machine learning applications. The NXP i.MX 8M Mini applications processors, available

from Mouser Electronics, are optimized for ultra-low-power (down to sub-Watt in specific applications), integrating up to four Arm® Cortex®-A53 cores running at up to 1.8 GHz, plus a 400 MHz Cortex-M4 for low-power real-time processing. The devices support 2D and 3D graphics to provide a rich visual HMI experience, feature hardware 1080p video acceleration to enable two-way video applications, and offer advanced audio capabilities to enable audio-rich applications.

Mouser Electronics  (817) 804-3800 

announced a range of galvanically isolated transformers that provide the correct voltage and power for the company’s SCALE-iDriver™ family of gate drivers. The combination delivers a simple, robust and cost- efficient DC-DC converter solution that does not require additional voltage regulation, reducing system cost and development time. The SIT12xxI transformer and SCALE-iDriver ICs are fully UL and VDE approved. The new SIT12xxI transformers feature an innovative insulated construction that improves reliability and delivers


a high isolation capability combined with low coupling capacitance. Devices suit both 600 V and 1200 V two-channel SCALE-iDriver gate drivers with 5 V (SIT1253I) or 15 V (SIT1217I) input voltages and 25 V output voltage.

Power Integrations  (408) 414-9200

Pickering Interfaces launches SPM A

ower Integrations (Nasdaq: POWI), the leader in gate-driver technology for medium- and high-voltage inverter applications, today

uto-Detection speeds set-up; Route-Caching increases switching speed. Pickering Interfaces,

the leading supplier of modular signal switching and simulation solutions for use in electronic test and verification, has launched an updated version of its signal routing software, Switch Path Manager Version 6.1.2, which adds auto-detection and route caching features that improve speed and performance. Pickering’s Switch Path Manager (SPM) software simplifies signal routing through switching systems

and speeds up the development of switching system software and is especially useful for large complex switching systems. It supports Pickering’s 1000’s of switching modules and the interconnection between them. Once a switching system model has been created, signal routing can be achieved simply by defining the endpoints that are required to be connected. Useful features like short-circuit detection are included.

Pickering Interfaces  +1 978-455-0376  New DIN Rail AC inrush current limiter for capacitive & inductive loads

capacitive and inductive loads in a variety of applications. These include installations across complex automation systems and machinery as well as isolation transformers or LED lighting applications where they are particularly useful because you can have a large number of LED driver power supplies operating in parallel and all taking high peak currents together on switch on.


The PSICL series is a true current limiter and cuts off all peak currents when starting loads under practically every AC condition. Extreme conditions can occur on AC lines in the event of a break in the supply and when power returns, high current peaks can often cause havoc and will trip circuit breakers. In decentralised areas, this will often lead to increased maintenance costs as the breakers require re-setting. The PSICL current limiter prevents this happening and can result in reduced cable cross section used and smaller and faster circuit breakers.

The PSICL Series is available in three 230VAC single phase models with continuous operating current rating of 12A, 16A and 25A. Current limiting time is 100-500mS with repeat intervals of 1000mS. They have an operating temperature range of --40ºC to +70ºC and conform to EN60950-1 and EN61000-6-2,3 standards and are CE and RoHS. MTBF figures are 300,000 hours.

The PSICL is a housed in a low profile V0 flammability rated plastic case measuring 91H x 71W x 57Dmm. The same design designated PSESB Series is also available in a very slim width enclosure with measurements of 100H x 22.5W x 112Dmm. Both items are DIN Rail mounted and internal circuitry is identical for both versions.


owersolve’s new PSICL series is a low-cost peak inrush current limiter designed for

Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44