SPONSORS WHAT’S NEW ATAG Commercial introduces new range of pressurisation units
temperature sealed heating, cooling and chilled water systems. The floor standing and wall mounted units remove the need for cold water header tanks and associated pipework, while also eliminating reliance on mains pressure to provide the system head. Each PHR pressurisation unit is totally enclosed in a robust powder
A
SB2DALIT8230, which supports the latest trend in commercial lighting – the possibility to adjust the colour temperature in addition to controlling the light level. The colour temperature can be adjusted
C
automatically in such a way to mimic the circadian rhythm, by changing the LED’s colour temperature from warm white (2700K) all the way to cool white (6500K) over the course of the day. Lighting has a profound effect on the human body and affects how we all feel and function; adjusting light intensity can create energising, relaxing and productive lighting modes. This promotes feelings of wellbeing and even increases productivity
coated steel casing, with a removable cover providing access to all internal components. All models have a 7.6 litre capacity break tank, pump nonreturn valve and plant interlock circuit, as well as volt free contact for low and high system pressure. Plus, integral, comprehensive safety circuits (to shut down plant in the event of a fault) ensure compliance with health and safety requirements at all times. The PHR T is a floor standing twin pump model, available with
Tunable lighting control
arlo Gavazzi has launched its new DALI Gateway the
for people who spend large parts of their day indoors under artificial light by mimicking outdoor lighting conditions. The SB2DALIT8230 is used as part of a Dupline® system. Dupline® bus wiring
topology is completely free which means the installation can be carried out using the lowest cost route rather than just multi dropping from sensor to sensor. Either way this solution is easier and cheaper than traditional parallel wiring, which also reduces the number of DDC’s and sub panels required and provides higher flexibility for last minute changes and enhancements.
www.carlogavazzi.co.uk Terminal takes off with Grundfos
berdeen Airport has been working on a master plan to enhance its passengers’ experience that started back in 2015 and is due to be fully completed by 2019. Some of this work, that is part of a £20 million terminal transformation, has been obvious to the 3 million passengers who currently travel through this hub every year. For example, the new baggage reclaim areas and upgrades to the infrastructure itself, while other phases have been happening behind the scenes. This is certainly true for the many of
A
Grundfos pumps from the TP, MAGNA3 and UPSN circulator pump families that are at the heart of the M&E solution, whose role it is to provide the pump requirements to support all HVAC and HWS requirements within the new terminal. To achieve the best outcome, Grundfos
launched SchwankControl. This new flexible temperature control solution can be used either on or off site, analysing all data affecting a heating system in real time. SchwankControl can be fully
S
integrated into a BMS (Building Management System) and can create defined temperature zones, adjusting heating systems for energy efficiency and operational requirements.
worked with consultants WSP and the installers Richard Irvin Energy Solutions team to ensure that every step within the process met the ambitions of this far seeing project that is due to be completed in 2019. Find out more about how Grundfos can help to keep your business flying high by visiting:
www.grundfos.co.uk
chwank, a world market leader in the manufacture of gas fired infrared heating systems, has
TAG Commercial has introduced its new PHR range of compact pressurisation units, designed to automatically top up and maintain the minimum pressure requirements for low to medium
electronic controls. It utilises a 16 character backlit LCD display and keypad for viewing operation and system information. Two wall mounted single pump models complete the range, with the PHR E boasting a microprocessor control and pump kick function. Elsewhere, the PHR M utilises simple to set pressure switches, with scales visible behind its casing cover. This unit has a float valve and system pressure gauge, plus low, high and pump pressure switches. For more information, visit:
www.atagcommercial.co.uk
device which can connect to multiple applications: SIP+. The platform can access and integrate your buildings data to assist with building optimisation, energy reduction and connecting to the Internet of Things (IoT). The device is responsible for turning buildings into smart buildings. SIP+ provides full visibility in accessing the data within your buildings plant and systems; for example, you can view an energy dashboard, transfer data to an analytics provider or connect numerous field drivers and thirdparty drivers to each other within the same multiprotocol platform. The list continues as SIP+ can
S
connect to an enterprise level system or tenant billing system.
the directive and radiant heaters Lot 20. Minimum efficiencies for warm air is now 72% and radiant heaters is now 74%. Crucially, these minimum criteria are applicable for both new installations and when replacing existing products. As a result, customers can be assured that the
W
heating equipment they are purchasing is highly energy efficient and emissions of harmful environmental pollutants are constrained. Our ErP compliant range includes, PREEVA EC
(heating and ventilation unit), which provides combined heating and ventilation with optional cooling. The units are available with a wide range of heat outputs and cooling capacities. The units are available as non condensing heaters with thermal efficiencies above 91% or fully condensing heaters with thermal efficiencies of 102% (ncv). The design combines high thermal efficiency, quality
components and ease of maintenance for enhanced life expectancy and reduced life cycle costs. The PREEVA EC range incorporates an EC plug fan,
which provides a wide range of air duties and external static pressures. The addition of the optional mixing box enables air filtration. For more information please email
erp@nortek.com or visit:
www.nortek
erp.com
SchwankControl offers major advances in heating systems management SchwankControl’s benefits
include: uTouch screen interface with overview of heating zones uInternet connection giving continual global access to the heating system uInputs and outputs including indoor and outdoor temperature sensors, humidity sensors and fire alarm input uBUS connection to each heater to identify issues for maintenance uAbility to adjust heating for holiday periods, shift times or
other requirements uFlexible integration into BMS system to coordinate its functions with those of the facility infrastructure uCompliant with EN6010101, EN55011 and EN 500821 safety standards Steve Sherman, Managing
Director of Schwank UK, explained: “SchwankControl supersedes our ThermoControl+ temperature control device and represents the best in German manufacturing expertise. It will assist facilities
managers to operate Schwank’s heating systems with maximum efficiency and ensure ideal comfortable temperatures for the workforce.”
www.schwank.co.uk/en/home Grundfos Pump School enrolling now
two new courses to the curriculum that are specifically aimed at people working with pump solutions in industrial and building services applications. Courses are held over one day and include the opportunity to get ‘hands on’
T
with various pump solutions. There is a range of dates available for the remainder of 2018 and a choice of venues. Courses are already proving to be very popular so early online booking is recommended. To view more details relating to the many options available, or to directly book
a course(s) visit
www.grundfos.co.uk and click on the Training link and then on Pump School and you will be able to view the courses and directly book your preference.
www.grundfos.co.uk VISIT OUR WEBSITE:
www.bsee.co.uk
he Grundfos Pump School has reopened its doors and is now offering a choice of 11 courses covering topics that relate to a wide range of applications including fire, dosing and wastewater. This year we are pleased to introduce
slim IP65 rated luminaire, with diecast aluminium body and polycarbonate lens optic for optimum performance and it is at home in many industrial and retail environments. Supplied as digital dimmable or
E
standard, Eris comes complete with stirrup bracket and hook for surface or suspension mounting and options include 20,250 lm and 32,400 lm variants with an
ris is the recent addition to join the HighBay family from Luceco. Eris is a modern and
efficacy of 135Llm/cW. Eris boasts two convenient sizes: Maxi HighBay 150W or 240W and Mini HighBay 100W or 120W. Eris, the planet, was only
discovered in January 2005 and was named after a Greek goddess. With an impressive 50,000 hours of maintenance free operation as well as a 5year extended life, Eris is a strong addition to the industrial luminaire range from Luceco.
www.luceco.com BUILDING SERVICES & ENVIRONMENTAL ENGINEER JULY 2018 37 ErP – we are ready
arm Air, Radiant and Heating Products are now affected by European Regulations. Warm air heaters are subject to Lot 21 of
design will deliver the performance required within a building – new build or refurbishment – can be eliminated using expertise
T
within Gilberts Blackpool. The leading independent air
movement manufacturer offers state of the art techniques to simulate and test a ventilation design in advance of on site installation. Using computation fluid dynamics (CFD) software, Gilberts can run the proposed ventilation/air movement design to validate its performance according to air changes, air quality, temperature. Appropriate adjustments can then be made to the strategy if required, and retested, to ensure the target performance criteria will be met
ynapsys Solutions has recently introduced one
Advertorial BSEE
Unlock a world of potential with SIP+ hardware
What’s more, SIP+ seamlessly supports up to 16 SIPslice devices and other products by utilising the DIN rail BUS system. Andy Thorn, Sales Director for
Synapsys Solutions said: “SIP+ is vital in optimising buildings and reducing energy. The hardware allows you to connect, select and go, it’s that simple. Current SIP customers, can continue to enjoy simplicity but benefit from all of the protocols and solutions which are supported by our existing SIP devices.”
www.synapsys
solutions.com/products/sipplatform/ Specification validation
he stress of wondering whether a
once the ventilation is installed and the building occupied. “The permutations affecting a
ventilation strategy are almost infinite, so trying to execute all the necessary calculations and validate a strategy is time consuming, especially as other influencing factors in the building design may be changed along the way,” observes Ian Leonard, Gilberts R&D Manager. “Our CFD is a cost effective method to minimise – or even eliminate – the need for costly prototypes, and can save significant amounts of time and money reworking a strategy by indicating where any potential weaknesses lie.”
www.gilbertsblackpool.com Eris from Luceco
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50