search.noResults

search.searching

saml.title
dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
Safety Briefings


RMI STRESSES THE NEED FOR PROPER INSPECTION AND MAINTENANCE OF IMMERSION SUITS


The Republic of the Marshall Islands (RMI) Maritime Administrator has published a Marine Safety Advisory to reaffirm the importance of proper inspections and maintenance of immersion suits. The RMI Maritime Administrator continues to observe a significant number of deficiencies (both during flag and port State inspections) relating to the condition of immersion suits. Since 1 January 2023, immersion suit defects account for nearly one-third of all lifesaving related deficiencies issued during flag State inspections of RMI-flagged ships. Commonly observed defects include:


- Defective or inoperable zippers - Failed seams - Holes or other defects in immersion suit material - Inoperative or missing light and/or whistle - Overdue air pressure testing


Deteriorated or inoperable zippers account for the largest percentage of observed defects. Defects of the zipper rarely affect only one immersion suit on board. Many times, numerous suits are found with the same defect when closely examined following the identification of one unacceptable immersion suit.


Defects or failures of seams of immersion suits are the next most commonly observed defect. Deficiencies issued following flag State inspections indicate that the seams at the hands, feet, and zipper are most susceptible to failure. Similar to defective zippers, the Administrator’s records indicate that seam failure rarely is found isolated to only one immersion suit, often with many found on board in the same condition.


Issues related to the overall condition of immersion suits on board RMI-flagged vessels are often identified during inspections. This includes deterioration or defects in the suit’s material, overdue air pressure testing, and missing or inoperable light and/or whistle (for suits designed to be worn without a lifejacket).


In several instances, immersions suits manufactured in China by “Dongtai City Jianghai Lifesaving & Firefighting Equipment Limited Company” and “DongTai City Dong Fang Marine Fitting Co., Ltd.,” were found to be significantly deteriorated despite being only about five years old.


Recommendations The Administrator recommends that all owners, operators, Masters, and crewmembers of RMI- flagged vessels take the following actions to raise awareness of the importance of properly inspecting and maintaining immersion suits: - Review the requirements on immersion suits and thermal protective aids contained in RMI Marine Notice 2-011-37, Life Saving Appliances and Systems;


- Review the requirements prescribed by the Company’s safety management system (SMS) relating to the periodic (monthly) inspection of all immersion suits to ensure they adequately address the requirements contained in IMO Circular MSC/Circ.1047;


- Ensure zippers are fully closed and opened during monthly check to ensure smooth operation throughout the zipper’s length;


- Ensure crewmembers responsible for conducting periodic inspections of immersion suits are properly trained and knowledgeable in the inspection procedure;


- Review the requirements prescribed by the Company’s SMS relating to air pressure testing of all immersion suits to ensure they adequately address the requirements contained in IMO Circular MSC/Circ.1114;


- Confirm that the number of immersion suits required on the Safety Equipment Certificate Form E are on board, in serviceable condition, and immediately available at the locations prescribed in RMI Marine Notice 2-011-37;


- Ensure that all crewmembers are familiar with the location on board where immersion suits are stored;


- Immediately notify the Administrator if defective immersion suits are identified and the number of immersion suits in satisfactory condition does not meet that required by Form E.


Safety Briefings, The Report, September 2023, Edition 105


41


IIMS 2023 Safety & Loss Prevention Briefings Compendium


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146  |  Page 147  |  Page 148  |  Page 149  |  Page 150  |  Page 151  |  Page 152  |  Page 153  |  Page 154  |  Page 155  |  Page 156  |  Page 157  |  Page 158  |  Page 159  |  Page 160  |  Page 161  |  Page 162  |  Page 163  |  Page 164  |  Page 165  |  Page 166  |  Page 167  |  Page 168  |  Page 169  |  Page 170  |  Page 171  |  Page 172