search.noResults

search.searching

saml.title
dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
44


Case study reprinted with permission of the MAIB


Flash, bang, wallop! container ship | explosion


Flash, bang, wallop! container ship | explosion


A container ship was on passage. In the engine room, the electrician was pondering how to repair a fault with the ship’s ballast water treatment system (BWTS), which needed to operate on arrival into port the next day. The power supply to the BWTS could not be reset, leading the electrician to believe the fault might lie with the circuit breaker. The defect only emerged after that morning’s work planning meeting. The electrician started their investigation anyway, opening the panel on the main switchboard to gain access to the circuit breaker. The chief engineer (C/E) observed this and instructed the electrician to close the panel and refer to the electrical drawings to try to


Circuit breaker base unit Circuit breaker base unit


Right base unit input connection that was vaporised by arc flash


Right base unit input connection that was vaporised by arc flash


A container ship was on passage. In the engine room, the electrician was pondering how to repair a fault with the ship’s ballast water treatment system (BWTS), which needed to operate on arrival into port the next day. The power supply to the BWTS could not be reset, leading the electrician to believe the fault might lie with the circuit breaker. The defect only emerged after that morning’s work planning meeting. The electrician started their investigation anyway, opening the panel on the main switchboard to gain access to the circuit breaker. The chief engineer (C/E) observed this and instructed the electrician to close the panel and refer to the electrical drawings to try to


identify the source of the problem. A short time later the C/E found the electrician still working in the switchboard. Repeating the instruction to the electrician not to work inside the panel, the C/E went to eat lunch.


identify the source of the problem. A short time later the C/E found the electrician still working in the switchboard. Repeating the instruction to the electrician not to work inside the panel, the C/E went to eat lunch.


The circuit breaker was designed to be removed without the need to isolate the base unit (Figure 1); however, the electrician was unfamiliar with this arrangement and had loosened one of the live connections on the input to the base unit (Figure 2). The electrician used rubber gloves to insulate themself from the live 440 volt (V) alternating current terminals when working on the connections.


Base unit input connections Base unit input connections


The circuit breaker was designed to be removed without the need to isolate the base unit (Figure 1); however, the electrician was unfamiliar with this arrangement and had loosened one of the live connections on the input to the base unit (Figure 2). The electrician used rubber gloves to insulate themself from the live 440 volt (V) alternating current terminals when working on the connections.


Circuit breaker (partially removed) Figure 1: The circuit breaker arrangement The Lessons The Lessons


1. Risk → Taking the time to fully understand the arrangement of the circuit breaker and base unit assembly would have enabled the electrician to safely remove the circuit breaker and reduce the risk of injury or death to an acceptable level. The safest equipment to work on is that which is not live; in this case, the arrangement of the circuit breaker and base unit meant that it was unnecessary to disconnect the cables.


2. Plan → Working alone without a permit to work, LOTO procedure or agreed safe system of work increases the risk of an accident. The work was unexpected and therefore not included in the day’s planning meeting. New work requires a new plan, regardless of time pressures. Maintenance or repairs to live equipment must undergo thorough risk assessment before starting work and, in all cases, should only be completed in exceptional circumstances and under the strictest control.


MAIB Safety Digest, October 2023, Merchant Vessels, Case 4 8 | MAIB Safety Digest 2/2023


8 | MAIB Safety Digest 2/2023 109


1. Risk → Taking the time to fully understand the arrangement of the circuit breaker and base unit assembly would have enabled the electrician to safely remove the circuit breaker and reduce the risk of injury or death to an acceptable level. The safest equipment to work on is that which is not live; in this case, the arrangement of the circuit breaker and base unit meant that it was unnecessary to disconnect the cables.


2. Plan → Working alone without a permit to work, LOTO procedure or agreed safe system of work increases the risk of an accident. The work was unexpected and therefore not included in the day’s planning meeting. New work requires a new plan, regardless of time pressures. Maintenance or repairs to live equipment must undergo thorough risk assessment before starting work and, in all cases, should only be completed in exceptional circumstances and under the strictest control.


IIMS 2023 Safety & Loss Prevention Briefings Compendium Figure 1: The circuit breaker arrangement


Circuit breaker (partially removed) Base unit output connections Base unit output connections Figure 2: The base unit connections Figure 2: The base unit connections


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146  |  Page 147  |  Page 148  |  Page 149  |  Page 150  |  Page 151  |  Page 152  |  Page 153  |  Page 154  |  Page 155  |  Page 156  |  Page 157  |  Page 158  |  Page 159  |  Page 160  |  Page 161  |  Page 162  |  Page 163  |  Page 164  |  Page 165  |  Page 166  |  Page 167  |  Page 168  |  Page 169  |  Page 170  |  Page 171  |  Page 172