This page contains a Flash digital edition of a book.
Marina Design


TEWKESBURY MARINA W


alcon Marine, the market leader in the design,


construction and installation of yacht marinas and harbours, has completed the total replacement of the pontoons and piles in Basin number 2 at Tewkesbury Marina on the River Avon in Gloucestershire, England. The project included a redesign of the marina to allow the efficient accommodation of the narrowboats and the wide­beam barges that are popular on the river.


The new marina has retained the basic layout of the original with four piers coming out from a walkway running along one side of the basin. However, both sides of one of the piers and a single side of the pier next to it have been fitted with a total of 17, extra­long finger pontoons that are mounted at 45° to their piers. These allow up to 36 canal boats and barges up to 18 metres (60 feet) in length to berth safely and securely, with minimal loss of area for other boats.


Walcon completes redesign and rebuild of basin No.2 at Tewkesbury Marina





They also simplify entering and leaving the berths by reducing the amount of manoeuvring required to come alongside. The remaining 78 berths are designed for motor cruisers and other craft up to 9 metres (30 feet) in length. As well as building and installing the new piers and finger pontoons, and fitting the services, Walcon was responsible for removing the old pontoons and piles and insertion of the new piles. The client arranged the required dredging. Walcon’s System 21 pontoons were used throughout, totalling 1,240 metres in length. This popular and durable design uses a galvanised steel frame with a hardwood deck supported on fibre concrete floats, and is widely used in both fresh and salt water environments.


Simon Amos, Marina


General Manager at Tewkesbury Marina, commented: “Over the last ten years Tewkesbury Marina has worked with Walcon Marine to replace all of the pontoons in two basins as well as the river moorings on both sides of the River Avon. For Basin 2 we again used Walcon’s System 21 pontoons, which we have been very pleased with from the installation in Basin 1 in 2007. They have also supplied an aluminium bridge, which looks superb.


24 F&A / September 2017


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68