SEM ACCESSORIES


n Z-Axis Electrically Conductive, 3M™ Double Sided Tape, 9703


3M™ Electrically Conductive Adhesive


Transfer Tape 9703 is a pressure sensitive adhesive (PSA) transfer tape with anisotropic electrical conductivity. The PSA matrix is filled with conductive particles which allow interconnection between substrates through the adhesive thickness (the “Z-axis”) but are spaced far enough apart for the product to be


electrically insulating in the plane of the adhesive. The PSA tack properties and lack of any thermal curing make tape 9703 easy to use in all applications requiring a conductive tape.


Specification: Adhesive Type: Release Liner Remover:


Temperature Range: Outgassing:


Description Filled Acrylic Pressure Sensitive


Silicone treated PolyCoated Kraft Paper Acetone


Short Term Exposure; 250ºF (121ºC) Long Term Exposure; 158ºF (70ºC) Total Mass Loss (TML): 0.7%


(ASTM E-595) The tape is available in 2 sizes and it comes on a 3” Core (76mm) Cat. #


77809-70 77809-80


Qty


Z-Axis Electrically Conductive, 3MTM Double Sided Tape each 9703, 6.35mm x 32.9m (1/4" x 36yrds)


Z-Axis Electrically Conductive, 3MTM Double Sided Tape each 9703, 12.7mm x 32.9m (1/2" x 36yrds)


n Scotch Double Sided Tape:


n 1) Without backing paper: Scotch 665


This is a non-conductive transparent tape with adhesive on both sides. There is no liner to remove and it is long lasting for permanent applications. 3" (77mm) core.


Cat. # Description 3M® 3M® 3M® 3M®


77100 77110 77101 77102


Qty


665, Double Sided, 1 665, Double Sided, 1 665, Double Sided, 3 665, Double Sided, 3


⁄4 ⁄4 ⁄8 ⁄4


” W x 36yds (6.4mm x 32.9m) each ” W x 36yds (6.4mm x 32.9m) 5/box ” W x 72yds (9.5mm x 65.8m) each ” W x 36yds (19mm x 32.9m) each


n 2) With paper liner: Scotch 666 This is a non-conductive transparent tape with adhesive on both sides


and white paper as a liner, which is slit in the center to facilitate its removal. This produces good adhesion and cleanliness. Comes 3 rolls inside a protective box, 3” core, 1


⁄4


Cat. # Description 3M® 3M® 3M® 3M® 3M®


77115 77116 77117 77118 77119


” (6.35mm) W x 36 yds (32.9m) L. Qty


666, Double Sided, 1 666, Double Sided, 1 666, Double Sided, 3 666, Double Sided, 3


⁄4 ⁄4 ⁄8 ⁄4


” W x 72yds (6.4mmx32.9m) each ” W x 36yds (6.4mmx32.9m) 5/pk ” W x 36yds (9.5mmx32.9m) each ” W x 36yds (19mmx32.9m) each


666, Double Sided, 1”Wx36yds (25.4mm x 32.9m) each


n X-Checker™ The X-Checker was the first and remains the only complete calibration aid for SEM/EDS Systems. When time is short but you want to know how well your system is performing you need the X-Checker. Each X-Checker comes with the following:


z Manganese to measure full width at half max detector resolution z Aluminum and copper to perform spectral calibration.


z Carbon to monitor calibration at the low end of the spectra for thin window detectors.


You also get two grid sizes for checking the accuracy of your image analysis software and an easy test for monitoring the amount of vacuum pump oil contamination on your detector window.


z The X-Checker™ BN comes with boron nitride for those who need a more sensitive monitor of low end performance on thin window and windowless detectors.


z The X-Checker™ Extra is the ultimate performance monitor for the latest state of the art X-ray detectors. In addition to the stan- dard features and boron nitride, there is a fluorine source to test resolution at the fluorine K-alpha peak (industry standard for measuring low end resolution). As well it comes with a beryllium grid for the ultimate test of detector performance.


Cat. #


80058-ST 80058-BN 80058-EX


40 Description X-Checker™, Standard


X-Checker™, With Boron Nitride X-Checker™, Extra


Electron Microscopy Sciences In PA: (215) 412-8400 • Toll-Free (800) 523-5874 Fax (215) 412-8450 or 8452 • email: sgkcck@aol.com or stacie@ems-secure.com • www.emsdiasum.com


Qty


each each each


n Disc (Tab) Punches Produces discs (tabs) from sheet materials. Ticket punching type. Comes with adjustable side gauge for centering hole, 2” maximum reach. Weight 10 oz., 61


⁄2 ” long.


Useful for punching adhesive tabs for specimen mounts, or producing circle cover slips from ACLAR®


⁄16 ”, 3 ⁄8 ”, 1 ⁄2


Maximum thickness for punching is up to 67-mil (1.7 mm). Disc size available: 5


and one punching die. Cat. #


77850-08 77850-09 77850-12 77850-25


Description Punch, 5 Punch, 3 Punch, 1


⁄16 ⁄8 ⁄2


” (7.94 mm) Circle ” (9.54 mm) Circle ” (12.7 mm) Circle


Punch, 1” (25.4 mm) Circle


films (EMS #50425 or #50426) for growing cells. ” and 1”. Complete unit includes one punch handle


Qty


each each each each


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44