Introducing SEM ACCESSORIES


n Carbon Conductive Adhesive 502 A High Temperature Conductive Paint


Conductive Adhesive 502 is a combination of specially processed carbon particles in a fluoroelastomer resin system designed to provide high resistance values. In its cured form, it exhibits both high and low temperature flexibility and moisture resistance.


Advantages: z Withstands ambient temperatures of over 500°F (260°C)


z Remains flexible over temperature range of –40°F to over 500°F (260°C)


z Cures at room temperature z Good adhesion to a variety of substrate z Excellent oxidation resistance z Ready to use - easy to apply


Typical Properties (as supplied): Pigment Binder Diluent Color


Consistency Density


Solid content by weight Viscosity


Flash point


Typical Properties (as cured): Color


Drying


Air drying of the product is adequate for most applications. To assure complete solvent loss, the coating can be baked for 15 minutes at 302°F (150°C)


RT 12684-30 Carbon Conductive Paint 502


n Graphite Spray An easy to use graphite spray to coat small samples. Its electrical resistance is 1-2 Kohm/sq” at 1 mil thickness. It is fast drying and produces a very flat, thin, and uniform graphite film. Its service temperature is up to 204°C.


12648 Graphite Spray 450g 12648 30 g


Specially Processed Carbon Fluoroelastomer


MethylEethylKketone (MEK) Black Fluid


7.2lbs/gal (0.87 kg/l) 13%


600 ± 200 mPas (Brookfield RVT @ 20rpm) 23°F (-°5C)


Shelf life for this product is one year under original seal. Store in cool place Black


Maximum service Temperature: 525°F (275°C) Sheet resistance


130 ± 100 ohms/sq.in./1 mil dry film Features


Modes of 3D imaging Stereo 3D using active 3D glasses Stereo 3D using Red/Cyan 3D glasses Motion Parallax 3D Movies (no glasses required)


3D Surface Profiling of Specimens


Automated Z-Focus Stacking Produces Extended Depth of Focus Images


Uses Standard Objective Lenses 2X to 100X with Magnifications over 1,000 times


Conventional Microscopes


Transmitted Light Brightfield, Darkfield, Phase Contract, Oblique Illumination and Polarization


Reflected Light


Fluorescence Module (coming soon) Edge®


3D Panfocal™ Software User Friendly Plug & Play System Controls the microscope Performs 3D image analysis


Edge® 3D Microscope Z-Focus Stacking Sample = Golgi Stained Neurons, transmitted light COST-EFFECTIVE 3D IMAGING... EdgeDigital 3D ® Micro/Macroscopes


Conventional microscopes only allow you to see small portions of the image in focus at a time.


Edge®


in focus with Z-Focus Stacking technology.


3D microscopes allow you to see the entire image


With conventional microscopes it is sometimes very difficult to make clear observations. The Edge-3D microscope's 3D Model mode provides valuable perspective and control to your samples. Sample = Gold Plate


Electron Microscopy Sciences In PA: (215) 412-8400 • Toll-Free (800) 523-5874 Fax (215) 412-8450 or 8452 • email: sgkcck@aol.com or stacie@ems-secure.com • www.emsdiasum.com


CONTACT US FOR MORE INFORMATION 33


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44