SEM ACCESSORIES n Loctite Adhesives


Loctite 409™ Super Bonder® For a general-purpose gel adhesive, clear, gap fills 0.010”; surface insensitive Ethyl, tensile shear strength 3,200 psi, and temperature range –65°F to 180°F. Cure speed: fixture - 75 seconds, full - 24 hours.


Loctite 454™ Prism® For use with porous surfaces, clear, gap fills


0.010”, surface insensitive Ethyl, gel type, tensile shear strength 3200 psi, temperature range –65°F to 180°F. Cure speed: fixture – 15 seconds, full - 24 hours.


Loctite 4861™ Prism® For use with flexible surfaces, clear, gap fill 0.008”, surface flexible Alkyl,


viscosity 4,000 cP, tensile shear strength 2465 psi, temperature range –65°F to 212°F. Cure speed: fixture – 25 seconds, full – 24 hours.


Loctite 349™ Impruv® For bond glass/metal, appearance: clear/straw, cure type: UV, viscosity:


9,500cP, shore hardness: D70, temperature range: –65°F to 266°F


Loctite 4011™ Prism® Designed for the assembly of difficult-to-bond materials, such as wood, paper, leather and fabric. Suitable for use in the assembly of disposable medical devices. The product provides rapid bonding of a wide range of materials, including metals, plastic and elastomers. Cure speed: 2 to 20 seconds depending on the material.


Chemical type: Ethyl cyanoacrylate, transparent, colorless to straw colored fluid. One part required no mixing. Low-viscosity (100 cP). Cure by humidity, and temperature range –65°F to 180°F


RT RT RT RT RT


72570-09 72571-54 72572-61 72582-01 72573-11


Loctite Super Bonder 409 Loctite Prism 454 Adhesive Loctite Prism 4861 Adhesive Loctite 349 Impruv Adhesive Loctite Prism 4011 Adhesive


Loctite 404 Quick Set Tissue Adhesive This adhesive is perfect for those applications where a


quick-curing adhesive is needed. Comes in an applicator- tipped bottle, 0.33 oz. (10ml).


RT 12687-01 Loctite 404 Quick Set Tissue Adhesive 10ml


Loctite™ 460 Adhesive Our LoctiteTM


460 is a quick curing low viscosity glue that


can be used for mounting samples to any substrate (glass, metal and/or plastic). It is soluble in acetone. Comes in an applicator-tipped plastic bottle — 20 g.


RT


12646-08 Loctite®


LoctiteTM 460 Adhesive Fixmaster® Poxy Pak™,


Fast Cure Epoxy This fast cure, general purpose epoxy bonds virtually any


material. It will also fill or seal cracks and rebuild worn surfaces. Comes in a 1 oz. syringe with a built-in plunger for easy dispensing without equipment. Working time is approximately 4 minutes. Includes nozzle and mixing stick. This unique adhesive may be made electrically conductive with the addition of any conductive powder (Silver, Carbon etc.)


RT 12646-09 36 Loctite® Fixmaster® Fast Cure Epoxy Poxy Pak™, each each


3 g Tube 3 g Tube 20 g


50 ml 20 g


n Krazy GlueTM


Pen


The one we all know and have used. Ready to use. Requires no mixing or preparation. This pen contains cyanoacrylate. Clear in color and bonds immediately. Comes in a 3g tube.


RT 12646-05 n MikrostikTM Krazy GlueTM Pen each Adhesive, Non-Conductive


Fast drying, ultrathin clear adhesive suitable for mounting small particles which can be submerged in other adhesives. It can be diluted with methyl ethyl ketone. Quick-drying. Comes in a bottle with an applicator brush. 14 ml.


12646-01 MikrostikTM Adhesive, Non-Conductive 14ml


n Rubber Cement Excellent adhesive for all paper pasting and mountings of drawings and photographs. It is also used to adhere specimens to SEM Stubs. Any excess cured cement can be easily removed. A 4 oz bottle comes with a brush in the cap.


72170 Rubber Cement each


n Low Temperature Hot Glue Gun This low temperature mini glue gun is safe and allows for the easy application of the melt glue to the aluminum stub for the mounting of bulk or irregular shaped specimens for SEM. Comes complete with a 40” cord, and two glue sticks. Accepts 5


72171 ⁄16 "


diameter all temperature or low temperature glue sticks. 110 volt, 10 watts.


72171-00 72171-10


Low Temp Hot Glue Gun Low-Temp Glue Sticks


n Adhesive Tabs Press these self-sticking adhesive tabs to the surface of an SEM mount, then lift off tab for applying the sample. Each box contains 72 sheets of 36 tabs each. Tab measures 12mm in diameter. Non- conductive.


76760 Adhesive Tabs


n Conductive “Lift-N-Press” Adhesive Tabs


This 1 ⁄2 " (12mm) diameter conductive tabs are


similar to our adhesive tabs, but they work like carbon adhesive tabs. Just remove tab from the roll, press onto surface where you want the film, lift “tab” and peel it off. The tabs can be cut to desired size before being removed from its backing, for use on smaller samples.


z Smoother background – over 99% transparent to EDS


z High strength adhesive z Better particle detection z Adhesive only 0.002” thick


76762-01


z Content a traces of nickel (<0.6%) and copper (<0.3%)


z 250 tabs per roll.


z An affordable double-sided con- ductive tab for all SEM samples.


Conductive Adhesive Tabs


Electron Microscopy Sciences In PA: (215) 412-8400 • Toll-Free (800) 523-5874 Fax (215) 412-8450 or 8452 • email: sgkcck@aol.com or stacie@ems-secure.com • www.emsdiasum.com


250/roll 2592 tabs/box each 10/pk


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44