SPECIMEN HOLDERS BULK


n SEM Bulk Specimen Holder


For clamping irregular, bulky samples


Opening: 15.9mm (5/8") wide X 25.4mm (1") long X 9.5mm (3/8") deep.


Pin Diameter: 3.2mm (1/8"). Material: Machined aluminum with stainless steel allen set screws. Allen wrench included. 75951-06


SEM Bulk Specimen Holder


n Large Bulk Specimen Holder


Opening: 32mm (1-1/4") wide X 32mm (1-1/4") long X 13mm (1/2") deep.


Pin Diameter: 3.2mm (1/8").


Material: Machined aluminum with stainless steel allen set screws. Allen wrench included. 75951-07


GEOLOGICAL


n Geological Thin Section Holder


This thin section holder is made from aluminum with copper clips and brass screws. The unit measures 55x30x8mm and holds a standard geological thin section or slide measuring 47 x 27mm. The holder comes complete with 2 clips to insure nothing moves. The holder has convenient tweezer inserts which allow for easy loading.


each


75941-15 75941-15H


Geological Thin Section Holder, 9.5mm Geological Thin Section Holder, Hitachi M4


n Variable Size Geological Thin Section Holder


Large Bulk Specimen Holder


n X-Large Bulk Specimen Holder Holds up to 2" specimens


Opening: 52mm (2") wide X 40mm (1- 1/2") long X 13mm (1/2") deep.


Pin Diameter: 3.2mm (1/8") Material: Machined aluminum with stainless steel allen set screws.


Allen wrench included. 75951-08


X-Large Bulk Specimen Holder


n XX-Large Bulk Specimen Holder Holds up to 3" specimens


each each


This thin section holder is made from vacuum grade aluminum with copper clips and brass screws . The unit measures 51x32x8mm and holds either standard thin sections of 47 x 27mm or smaller or larger thin sections. Smallest size would be 40x20mm. The holder comes complete with 2 clips to insure nothing moves. The holder has convenient tweezer inserts which allow for easy loading.


75941-16 75941-16H 75941-15


75941-15H each


each


75941-16 Variable Size Geological Thin Section Holder, 9.5mm Pin each 75941-16H Variable Size Geological Thin Section Holder, Hitachi M4 each


n Dual Geological Thin Section Holder


This thin section holder made from aluminum with copper clips and brass screws. The unit measures 55 x 58 x 8mm and it holds two standard geological thin sections or slides of 47 x 27mm. The holder has convenient tweezer inserts which allow for easy loading. Tweezer inserts enable easy loading. Clips are provided for secure holding.


75941-18 75941-18H


75941-18


75941-18H


Dual Geological Thin Section Holder, 9.5mm Pin each Dual Geological Thin Section Holder, Hitachi M4 each


n Quadruple Geological Thin Section Holder


Opening: 80mm (3-1/8") wide X 48mm (1-7/8") long X 13mm (1/2") deep. Pin Diameter: 3.2mm (1/8"). Material: Machined aluminum with stainless steel allen set screws. Allen wrench included. 75951-09


XX-Large Bulk Specimen Holder each 75941-19 Quadruple Geological Thin Section Holder, 8.5mm Pin each 75941-19H Quadruple Geological Thin Section Holder, Hitachi M4 each


Electron Microscopy Sciences In PA: (215) 412-8400 • Toll-Free (800) 523-5874 Fax (215) 412-8450 or 8452 • email: sgkcck@aol.com or stacie@ems-secure.com • www.emsdiasum.com


17


This thin section holder made from aluminum with copper clips and brass screws. The unit measures 107 x 58 x 8mm and it holds four standard geological thin sections or slides of 47 x 27mm. The holder has convenient tweezer inserts which allow for easy loading. Tweezer inserts enable easy loading. Clips are provided for secure holding.


75941-19


75941-19H


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44