SEM ACCESSORIES


n Thin Sample Holder


Ideal for the examination of cross sections of thin samples, such as wafers, multi-layer of capacitors, plastics, metals, etc.


1. For most AMRAY: 1 " diameter (12.7mm), 1 (3.1mm) with split openings up to 1 (5⁄16") pin height or 15mm (9


⁄2 ⁄16") pin height. Cat No.


75948-08 75948-15


Description


Thin Film Holder, 8mm(L) Pin Thin Film Holder, 15mm (L) Pin


⁄16") (dia). x 10mm(3


Qty. each each


2. For ISI, JEOL, TOPCON: Double set screw for a secure holding of the specimen during observation. 15mm(9 (1


⁄8") (H), 6.4mm ⁄4") split. Cat No. 75948-10 Description Thin Film Holder, 15x10mm Stub


n Cross Sectional Holder


Made from non- magnetic stainless steel with 3.1mm (1⁄8") diameter pin and adjustable angle turn- screw. Just insert specimens edge-on and observe the cross section directly.


Cat No. 75942-01 Description Cross Sectional Holder


n 45° Pin Mount and 90° Profile, Combination Holder


For Hitachi S-800, S-4000, S-4100, S-4200, S-4300, S-4500, S-4700 and S-3600N SEMs.


For cross sections up to 6.35mm (1/4"). Available in aluminum or brass with stainless steel allen set screws. Includes allen wrench.


Cat No. Description


75950-07-A 45°/90° Combination Holder, Aluminum


75950-07-B 45°/90° Combination Holder, Brass


Qty. each each


75950-07-A Cat No.


75958-16 75958-17


Qty. each


Qty. each


Cat No.


75958-11 75958-12 75958-13 75958-14 75958-15


75958-14 Description


Wafer Holder for 1" (25mm) dia. Wafer Holder for 2" (51mm) dia. Wafer Holder for 3" (76mm) dia. Wafer Holder for 4" (100mm) dia. Wafer Holder for 6" (150mm) dia.


75958-15


Qty. each each each each each


n Wafer Holders, Notch Style These wafer holders are made from aluminum and feature brass clips which secure the wafers. Each holder comes with a 1/8” (3.2mm) pin of 3/8” (9.5mm) length.


Available in two sizes to accommodate a variety of wafers. ⁄8" (3.1mm) diameter pin ⁄4" (6.4mm). Available with either 8mm 75958-11 75958-12 75958-13


n Wafer Holders These wafer holders are made from aluminum and feature brass clips which secure the wafers. Each holder comes with a 1/8” (3.2mm) pin of 3/8” (9.5mm) length.


Available in six sizes to accommodate a variety of wafers.


75958-16 Description


Wafer Holder for Notch Style Wafers, 4" (100mm), Pin


Wafer Holder for Notch Style Wafers, 6" (150mm), Pin


75958-17


Qty. each each


75950-07-B


20


Electron Microscopy Sciences In PA: (215) 412-8400 • Toll-Free (800) 523-5874 Fax (215) 412-8450 or 8452 • email: sgkcck@aol.com or stacie@ems-secure.com • www.emsdiasum.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44