SEM ACCESSORIES SAMPLE PREPARATION STATIONS STORAGE


n SEM Specimen Preparation Stand Specimen mounts of different sizes are placed in the outer ring of the holder base. The center hole of the base will hold a bottle of conductive adhesive. One side of the base takes 10 of the 1


⁄8 " pin mounts;


reverse side takes 10 of 10 to 15mm diameter mounts.


76750 1 " SEM Preparation Stand ⁄8 each


n SEM Specimen Prep-Stand; Multi-Angle A SEM specimen preparation stand with the ability to hold pin mounts on a 45° angle as well as in a vertical and horizontal direction. The stand which is made from Aluminum comes complete with screws that are used to secure the mount during preparation. Both ½” (12.7mm) and 1”(25mm) mounts can be accommodated on the stand


Measurements: 2.75” ( 70mm) x 2” (50mm) x 1.6” (40mm) 75958-22 SEM Specimen Prep-Stand; Multi-Angle


n Prep-Stand: Pin Mounts This stand is made from Aluminum and measures 2.4”(61mm) x 0.63” (16mm) and provides a stable surface for a variety of pin mounts.


75958-23 Prep-Stand; Pin Mount Style n Pin Mount Prep-Store Station each each Cat. #


76541-10 76541-20 76541-30 76541-40


76541-50 Description ⁄8 ⁄8


rack. Each shelf holds 5 SEM stubs with 1 Model SS100-375 – 3


rack. Each self holds 3 SEM stubs with 3 Model SS100-125-1 – 1


⁄8 ⁄8 Qty


Model SS100-TEM – TEM Grid Box Holder. Consists of 3 vented TEM set grid boxes and storage rack to fit into SampleSaver™ SS100 Model SS100-125 – 1


" SEM Stub Holder. Consists of 3 tiers sample set ⁄8


" SEM Stub Holder. Consists of 3 tiers sample set ⁄8


" pin. (SEM stubs not included) " pin (SEM Stub not included)


sample rack. Bottom shelf holds 1" dia sample mount and top two shelves each hold 5 SEM stubs with 1 Model SS100-375-1 – 3


" SEM Stub Holder. Consists of 3 tiers ⁄8


sample rack. Bottom shelf holds 1" dia sample mount and two top shelves each hold 3 SEM stubs 3


" SEM Stub Holder. Consists of 3 tiers ⁄8


set " pin (SEM stubs not included) set " pin (SEM stubs not included)


n Sample Racks for the SS200 Sample Saver™ These sample racks are designed to fit into the SS200 Sample Saver™


Cat. #


This stand is ideal for either storage and or specimen preparation of mounts. Made from Aluminum and has the capacity to hold up to 40 x ½ “ (12.7mm) pin mounts or 12 of the 1” (25mm) mounts.


The Stand measures 5.39” (137mm) x 3.5” (89mm) x 0.63” (16mm). 75958-24


Pin Mount Prep-Store Station each


76542-00 76542-20 76542-30 76542-40


76542-50 Description


Model SS200-FIB – FIB Sample Holder to store SBT CastleGuard™ Holders (CastkeGuard™ holders not included) Model SS200-125 – 1


⁄8 ⁄8


rack. Each shelf holds 5 SEM stubs with 1 Model SS200-375 – 3


rack. Each self holds 3 SEM stubs with 3 Model SS200-125-1 – 1


⁄8 ⁄8


sample rack. Bottom shelf holds 1" dia sample mount and top four shelves each hold 5 SEM stubs with 1 Model SS200-375-1 – 3


" SEM Stub Holder. Consists of 5 tiers ⁄8


sample rack. Bottom shelf holds 1" dia sample mount and four top shelves each hold 3 SEM stubs 3


" SEM Stub Holder. Consists of 5 tiers ⁄8


" pin (SEM stubs not included)


Electron Microscopy Sciences In PA: (215) 412-8400 • Toll-Free (800) 523-5874 Fax (215) 412-8450 or 8452 • email: sgkcck@aol.com or stacie@ems-secure.com • www.emsdiasum.com


27 for


the storage of TEM grid boxes or aluminum stubs that needed to store in safe environment.


Qty set


" SEM Stub Holder. Consists of 5 tiers sample set ⁄8


" SEM Stub Holder. Consists of 5 tiers sample set ⁄8


" pin. (SEM stubs not included) " pin (SEM Stub not included)


set " pin (SEM stubs not included) set n SampleSaver™


n Portable Storage Containers Our custom storage container for the storing and transporting of samples for SEM, TEM, FIB, AFM, etc. This device is different from a vacuum storage unit or from desiccators. The unit allows you to evacuate and backfill or purge with dry nitrogen. You can then pressurize the container to eliminate the possibility of diffusion into the container. It is ideal for shipping or storing sensitive samples from lab to lab.


Cat. #


76540-01 76540-02


Description


Small Portable Storage Container, SS100 Large Portable Storage Container, SS200


n Sample Racks for the SS100 Sample Saver™


These sample racks are designed to fit into the SS100 Sample Saver™ for the storage of TEM grid boxes or aluminum stubs that needed to store in safe environment.


Qty


each each


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44