SEM ACCESSORIES


n Small FIB Grid Holder Holds up to 2 FIB grids of the same thickness. Handy FIB grid holder on


a standard 12.7mm (1/2") pin stub. Can also be used to safely store FIB grids with thin sections attached.


Overall Dimensions: 12.7mm (1/2") x 7.8mm (0.3mm) H w/o pin. Pin: Standard 3.2mm (1/8").


Cat. # 75950-02 Description


Material: Vacuum grade aluminum with brass screw.


Includes Philips screwdriver #0. Qty


Small FIB Grid Holder, 12.7mm, Pin each


n Single 1/2" FIB Sample and Grid Holder Holds a FIB sample mounted on standard 1/2" (12.7mm) pin stub for FIB


milling and lift-out procedures. Conveniently holds two FIB grids close to the sample to mount prepared TEM lamellae on the FIB grid for TEM imaging. Cost-effective holder suitable for all FIB/SEM systems which accept pin mount holders, including the FEI, ZEISS and Tescan systems. For the JEOL and Hitachi systems, use a pin mount adapter.


Overall Dimensions: 22.4 x 12.7 x 11.7mm (0.88" x 0.5" x 0.46"). Pin: Standard 3.2mm (1/8").


Cat. # 75950-03 Description


Material: Vacuum grade aluminum with brass screws.


Includes Philips screwdriver #0. Qty


Single 1/2" FIB Sample and Grid Holder, Pin


n Double 1/2" FIB Sample and Grid Holder


Holds FIB samples mounted on two standard 1/2" (12.7mm) pin stubs for FIB milling and lift-out procedures. Conveniently holds two FIB grids close to the sample to mount prepared TEM lamellae on the FIB grid for TEM imaging. Cost-effective holder suitable for all FIB/SEM systems which accept pin mount holders, including the FEI, ZEISS and Tescan systems. For the JEOL and Hitachi systems, use a pin mount adapter.


Overall Dimensions: 36.5 x 12.7 x 11.6mm (1.44" x 0.5" x 0.46"). Pin: Standard 3.2mm (1/8").


Cat. # 75950-04 Description Double 1/2" FIB Sample and Grid Holder, Pin


n Multiple FIB Grid Holder Larger size enables this FIB grid holder to handle multiple FIB


grids of the same thickness. Can also be used to safely store FIB grids with thin section (lamellae) attached. Convenient brass thumbscrews make loading and unloading easy.


Overall Dimensions: 22.5 x 29 x 13.5mm (7/8" x 1-1/8" x 5/8"). Pin: Standard 3.2mm (1/8"). Cat. #


Description 75950-05 Multiple FIB Grid Holder


n 1" FIB Sample and Grid Holder Holds an FIB sample mounted on a standard 25mm (1") pin stub for


FIB milling and lift out procedures. Can also be used to hold FIB grids of the same thickness to mount the prepared lamellae on an FIB grid for TEM imaging. This cost-effective and versatile holder is suitable for all FIB/SEM systems which accept pin mount holders, including the FEI, ZEISS and Tescan systems. For the JEOL and Hitachi systems, use a pin mount adapter. Convenient brass thumbscrews make loading and unloading easy.


Overall Dimensions: 50 x 29 x 13.5mm (2" x 1-1/8" x 5/8"). Pin: Standard 3.2mm (1/8").


Cat. # 75950-06 Description 1" FIB Sample and Grid Holder, Pin


Material: Vacuum grade aluminum with brass screws.


Qty each


Electron Microscopy Sciences In PA: (215) 412-8400 • Toll-Free (800) 523-5874 Fax (215) 412-8450 or 8452 • email: sgkcck@aol.com or stacie@ems-secure.com • www.emsdiasum.com


21


Material: Vacuum grade aluminum with brass thumbscrews.


Qty each


n Fortress™ FIB Holder – High Profile High Profile Fortress™ FIB Holder to hold a standard FIB lift-out specimen on a grid.


n Fortress™ Sample Loader Securely holds the Fortress™


Cat. #


75957-01 75957-50


Description


FIB sample Holder – High Profile Fortress™


High Profile holder under a


stereomicroscope and permits viewing from 2 angles without changing focus on the microscope.


Qty. each


Sample Loader for High Profile each


Material: Vacuum grade aluminum with brass screws. Philips screwdriver #0 included.


Qty each each n FIB Sample Holders


Fortress™ FIB Holder with CastleGuard™ Protection Fortress™


FIB Holders are reusable holders that secure FIB


sample that are held in a specific orientation without the use of adhesives, adhesive tabs, or conductive paints. Fortress™


FIB


Holders can be used to position a thin, whole or cut TEM grid/disk in an orientation such that either in-situ or an ex-situ. FIB lift-out technique can be used to attach a FIB-prepared sample. Physical protection of the mounted sample on the grid is provided with the CastleGuard™


protection design. Up to 30


Fortress FIB Holders can be stored in a single SS200 Sample Saver™


storage container. Features:


z Unique clamping mecha- nism secures sample with- out over tightening


z Standard 1 ⁄8 " pin mount fits most FIBs and SEMs


z Peripheral support structure protects specimens during handling and transport


z Economical design enables user to prepare and store samples on the same holder


z Compatible with Sample Saver™


Storage containers


for secure storage and transport in an inert envi- ronment


n Fortress™ FIB Holder – Low Profile Low Profile Fortress™ FIB Holder to hold either a standard FIB lift out specimen on a grid or an H-Bar cut Sample.


n Fortress™ Sample Loader Securely holds the Fortress™ Low Profile holder under a stereomicroscope and permits viewing from 2 angles without changing focus on the microscope.


Cat. #


75956-01 75956-50


Description FIB sample Holder for Low Profile


Qty. each


Fortress™ Sample Loader for Low Profile each


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44