SPECIMEN HOLDERS n E-Beam


Lithography Mount


n Mini SEM Clamp 10mm, 15mm Diameter


Aluminum Mini SEM clamp on a 10mm, 15mm diameter M4 cylinder mount. Convenient for holding flat or thin specimens such as silicon chips, wires, foil and small tubes.


Screw is M2 x 3mm, pan head screw, brass. 75955-19


This mount, made from aluminum features an M4 threaded hole and is 25mm in diameter. The clips are made from copper. The mount comes complete with a Faraday Cup (2.5mm x 100nm hole) and a gold/carbon resolution sample 3mm in diameter is included. The gold particle size range is 5–150nm


75944-15


n Specimen Block, 10 Clips


This block is engraved, numbered 1–10. Measures 12 x 48mm.


Comes complete with pin. 75955-03


n Specimen Block, 8 Clips


This block is engraved, numbered 1–8. Measures 12 x 48mm.


Comes complete with pin. 75955-04 Specimen Block, 8 clips


n Replacement Clips and Screws


Clips are made from spring grade beryllium-copper alloy. Thickness: 0.25mm (0.01"), overall length: 12.7mm (1/2"), width at tip: 1.6mm (1/16"), hole diameter: 2.2mm (0.087").


75954-06 75954-07


SEM Clips SEM Screws, Brass, M2 x 3mm length


10/pk 10/pk


each Specimen Block, 10 clips each E-Beam Lithography Mount, M4 each Mini SEMClamp 10mm, 15mm diameter, M4


n Mini SEM Clamp, 12.7mm Mini SEM Clamp on a standard 12.7mm (1/2") pin stub. Suitable for holding flat or thin specimens such as silicon chips, foil, wires, and small tubes.


Material: Vacuum-grade aluminum with brass screw. 75954-01


Mini SEM Clamp 12.7mm, Pin each


n Small SEM Clamp, 15 x 10mm 15mm (0.6") long with 10mm (0.4") wide clamping area and standard pin stub 3.2mm (1/8"). Suitable for holding samples up to 7mm overall thickness. Perfect for small tubes, strips, wires, and smaller flat samples.


Overall Dimensions 23 x 20 x 9mm (0.9"x0.78"x0.35") Material: Machined aluminum with brass screws.


each


75954-02


Small SEM Clamp 15 x 10mm, 3.2mm (1/8") Pin each


n Medium SEM Clamp, 25 x 15mm


25mm (1") long with 15mm (0.6") wide clamping area. Features standard pin stub 3.2mm (1/8"). Suitable for holding samples up to 7mm overall thickness. Perfect for small tubes, strips, wires, and smaller flat samples.


Overall Dimensions: 33 x 25 x 9mm (1.3"x1"x0.35")


Material: Machined aluminum with brass screws. 75954-03


Medium SEM Clamp 25 x 15mm, 3.2mm (1/8") Pin each


n Recessed SEM Clamp, 25 x 15mm Achieve background-free imaging and no contact with sample surface in imaging area with this 5mm recessed clip


Clamping Area: 25mm (1") long X 15mm (0.6") wide.


Maximum Thickness: 7mm under the clamping strips.


Overall Dimensions: 33 x 25 x 11mm 1.3"x1"x0.43").


Material: Machined aluminum with brass screws. 75954-05


Recessed SEM Clamp 25 x 15mm, 3.2mm (1/8") Pin each


Electron Microscopy Sciences In PA: (215) 412-8400 • Toll-Free (800) 523-5874 Fax (215) 412-8450 or 8452 • email: sgkcck@aol.com or stacie@ems-secure.com • www.emsdiasum.com


19


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44