Polymer distributor


adds brands Polymer distribution company, Polydist UK, partners with some of the world’s leading polymer producers, such as Braskem, Equate and SABIC, serving a network of local consumers across the UK. It is proud to introduce


SABIC’s Specialties products to the current portfolio of polymer resins, including the well-known brands Noryl and Ultem resins and LNP compounds, co- polymer polycarbonate grades.


Visit Polydist UK at stand P245


Wireless RF modules inspire new applications


PCB production covers rigid and fl exible forms


Located in Lithuania, PCB Baltic supplies a full range of PCBs, from prototypes to large volumes, and covering the fields of standard rigid PCB, flex, rigid-flex aluminium and HDI PCBs. All orders are checked according


to its quality control program, regardless of volume or lead time. The worldwide team helps customers achieve cost reduction without compromise to engineering excellence, quality of product, reliability of supply and eff icient management, says the company. It off ers services such as CAM


assistance, quality control and technical support.


Visit PCB Baltic at stand J70


Design service for component moulding


For more than 30 years, Precision Engineering Plastics, has produced close tolerance injection moulded components. Serving the automotive, electrical/


electronics, engineering, aerospace and medical industries, it delivers injection moulding, insert moulding, two-shot moulding and secondary/ post-processing services. As well as off ering in-house tool


New LoRa radio modules and a range of off -the-shelf products will be shown by RF Solutions. LoRa modules include the Lambda


62 RF module, an 868/915Mhz LoRa transceiver, described as a cost eff ective radio module which features the Semtech SX1262 LoRa providing a long range of +20km. Visitors will also see the Lambda 80, which is a long range LoRa RF module operating at 2.4GHz, the only world-wide licence-exempt band. It features the Semtech SX1280 LoRa spread spectrum. These highly eff icient, aff ordable modules enable new applications never previously realised, says the West Sussex-based company. The UK RF remote control and


telemetry systems supplier has been manufacturing RF components and remote control systems for 25 years.


Visit RF Solutions at stand H105


http://b.link/linkedin76


design, the company has its own tool room, delivering a comprehensive service from initial design evaluation through to new tool manufacture and on-going tool maintenance and service. A specialist in challenging high-


grade engineering polymers, it works with a range of materials including, PEEK, PPA, LCP, PPS, polyesters, POM, PC/ABS alloys, TPE, various nylons including PA66 and PA12 and glass-filled polymers (up to 65% glass filler) such as IXEF and Amodel. Quality systems have been updated from TS 16949:2009 to


A CANbus LVDT and a rotary position sensor will be launched at the show by RDP Electronics. The CANbus LVDT (pictured)


IATF 16949:2016 and the ISO9001 certification has been updated to ISO9001:2015. Visitors can see a range of


products from various industries, with part sizes ranging from just a few millimetres to much larger components such as panels for printers and automotive trim.


Visit Precision Engineering Plastics at


stand H130


Ready to integrate with power supplies and displays


AC/DC power supplies, DC/DC converters, DC/AC inverters and displays from Relec Electronics are available to equipment manufacturers and systems integrators.


If a customer is looking for a


standard catalogue product, the company has an extensive range of products, but can also provide much more than just a standard model, with an understanding of applications, specifications and governing standards, it can find the right solution for the application. It provides options and


enhancements in all lines and by


off ering manufacturing services such as sub-assemblies and


finished products. Many products complement one another, allowing customers to source many of their power supplies and displays from a single supplier.


Products off ered for rail


applications comply with national and international railway standards EN50121-3-2 and EN50155. Products may also benefit from having been listed by Network Rail PADS (Parts and Drawing System).


Visit Relec Electronics at stand D110


combines the benefits of absolute, high-repeatability, robust LVDT technology with eff icient modern CAN interface protocols. The R360D rotary position sensor


uses contactless magnetoresistive sensing to provide a conditioned 4.0 to 20mA output over a full 360° of shaft rotation. The company designs, develops


and manufactures transducers and instrumentation for the measurement of linear and rotary displacement, force, pressure and torque at its Wolverhampton factory. It also designs custom transducers to suit specific environments and applications.


Its portfolio includes LVDT


transducers for linear displacement measurement and Micropulse magnetostrictive sensors, both technologies that are fundamentally contactless and reliable. Full scale ranges run from 1.0mm to 7.6m. For load cells (force), fluid pressure


and torque (reaction or rotating) it off ers strain-gauge technology from Honeywell’s Sensotec and Lebow ranges. Associated instrumentation,


separate or integral to the transducer, off ers analogue voltage, 4.0 to 20mA, RS232, RS485, SSI and fieldbus. Additional features, such as scalable displays, trips and data logging, are available.


Visit RDP Electronics at stand D30


Discover digital manufacturing


Visitors can discover all the competitive advantages off ered by Prima Power UK‘s Industry 4.0 Inside solutions for the digital transformation of manufacturing. Its software connects machines, monitors the entire production flow, and generates automatic processes from the order to the delivery with the highest eff iciency standards. Engaging virtual reality (VR)


presentations will show the laser and sheet metal working machinery available. There is the latest 3D fibre laser system, Laser Next 2141, with a range of configurations to suit any production need, the 2D fibre laser machine, Laser Genius 1530, which uses materials such as carbon fibre and synthetic granite and its modules


Online service sources from drawings


Drag, Drop, Source! is a free online service from Qimtek that allows buyers to quickly and easily upload drawings and receive multiple quotes directly from quality UK sub-contract engineering suppliers. Designed to save time and


resources, Drag, Drop, Source! is used by hundreds of OEMs every year. The company also hopes to speak to machinists, fabricators, sheet metal workers, plastic moulders and casting companies in the hunt for UK sub-contract engineering vendors


to join the service. The company says members are provided with a steady stream of live enquiries that match their in-house capabilities, with buyer contact details to provide a quote directly.


Visit Qimtek at stand K235


LVDT integrates CAN interface protocols


for the automation of the material flow, and the flexible manufacturing line, LPBB, including servo-electric punching, fibre laser cutting, servo- electric bending, and versatile automatic material flow, integrated with Night Train automatic storage.


Visit Prima Power UK at stand F115


5-7 FEB, FARNBOROUGH INTERNATIONAL, GU14 6XL | 9.30AM TO 4.30PM (CLOSES 3.30PM THURSDAY) WWW.INDUSTRYSOUTH.CO.UK


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20