BS EN ISO 6185-3:2018 ISO 6185‑3:2014


Introduction


ISO 6185 is subdivided into four parts as shown in Figure 1. It excludes: — single-chambered boats; — boats < 1 800 N buoyancy; and — boats made from unsupported materials>12kN inflated buoyancy and powered by motors>4, 5kW. It is not applicable to: — aquatic toys; and — inflatable liferafts. ISO 6185-1: — Type I Boats with LH < 8m propelled exclusively by manual means. — Type II Powered boats with LH < 8m with a power ≤ 4, 5 kW. — Type III Canoes and kayaks with LH < 8m. — Type IV Sail boats with LH < 8m with a sail area ≤ 6m2. ISO 6185-2: — Type V Powered boats with LH < 8m with power 4,5 kW< P ≤ 15 kW — Type VI Sail boats with LH < 8m with sail area > 6m2. ISO 6185-3: — Type Vll Powered boats with LH < 8m with power ≥ 15 kW. — Type Vlll Powered boats with LH < 8m with power ≥ 75 kW. ISO 6185-4: — Type IX Powered boats (design categories C and D) with 8m< LH ≤ 24m with power ≥ 15 kW. — Type X Powered boats (design category B) with 8m< LH ≤ 24m with power ≥ 75 kW.


viii


© ISO 2014 – All rights reserved


Distributed through RYA Online Standards Access under Licence No: 2020ET0001 © BSI

Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43