EDUCATIONAL & STUDENT FACILITIES
then able to connect lengths of the powertrack quickly and easy to create the network. We primarily used 3.6 metre lengths of Betatrak, which enabled us to install long runs quickly, but we also used the product in 2.4 metre, 1.8 metre and 1.2 metre lengths, which gave us the flexibility to take the power distribution into tight and awkward corners with the same plug and play ease of use.”
Floor box solution In all, the Derry Building Services team has installed more than 1.2km of Betatrak throughout the Faculty of Arts building, taking power to more than 500 floor boxes via tap offs on the network. Originally, a bespoke floorbox solution was specified for the building but this would have been both costly and time-consuming, prompting the contractor to propose a change to the CMD’s fast-fit 20 Series floor boxes. Manufactured at CMD’s Rotherham factory, the fast-fit 20 Series floor boxes provided time-saving benefits, guaranteed consistency and standardisation that will enable ease of procurement should any additional floor boxes need to be retrofitted in the future.
Adrian continued: “Initially the electrical consultant had been concerned that a standard floor box would not be robust enough for the busy student environment and they were particularly concerned about the durability and aesthetics of the trim.
“The CMD team worked with us to value engineer the specification to their fast-fit 20 Series product, which provided savings on both procurement and installation costs, while offering a readily available solution that fitted the needs of the building. CMD supported us with product samples and detailed technical data to demonstrate to both the consultant and the client that the change of specification would provide the quality required, simplifying installation and making it faster.”
CMD’s four-compartment fast-fit 20 Series floor boxes were installed throughout the building, with RCD protection provided within each unit. Each floor box contains twin sockets in two compartments, with the RCD and data connections in the remaining two.
IBRB The power distribution specification for the IBRB development was similar, with the same 63A standard earth Betatrak and a mix of three- and four-compartment floor boxes. This building will bring together up to 300 biomedical researchers from across the School of Life Sciences and Warwick Medical School so, once again, future flexibility was important. The use of the 63A Betatrak system not only allows for reconfiguration, it also provides the potential to increase the number of work stations and the variety of equipment in use.
The teaching, study and write-up facilities have also been specified with 118 Rotasoc under desk modular power units, in the IBRB building, complete with feed units. This ensures that the plug and play installation takes the electrical distribution direct to where power is needed at the desk, in a flexible installation that can be reconfigured easily as layouts and requirements change.
www.tomorrowsfm.com TOMORROW’S FM | 55
Manufactured by CMD Ltd at the company’s Rotherham factory, the Rotasoc under desk power module system connects to the Betatrak power distribution network via an infeed and RCBO circuit protection. The units allow a flexible configuration of power and data sockets at each workstation and, because the system is modular, additional units can be added on a plug and play basis should needs change. With a 32A internal busbar, the sockets provide smooth 3600 rotation, on- or off-load, increasing the flexibility for configuring and orienting equipment on the desk still further.
David Hammond, Capital Programme Director from the University of Warwick, added: “The university’s investment in these two buildings aims to drive collaboration in subject areas where we already have a strong reputation for excellence. We wanted to create buildings that embrace innovation and the potential for future change.”
Stephen Roberts, Head of Sales at CMD Ltd, added: “The education sector - the higher education sector in particular - is very forward focused and is adapting quickly to the needs of both students and commercial partners. Our underfloor and under desk solutions complement that progressive approach and we’re delighted to have been involved in the University of Warwick’s exemplar new campus buildings.”
www.cmd-ltd.com/
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68
