WASTE TO ENERGY
polyurethane systems can be deployed to repair and protect ripped conveyor belts. Te flexible rubber repair material, 2311 (SR Elastomer), is specially developed for emergency and permanent applications where high build, durability, elasticity, high abrasion and tear resistance are required. Screw conveyors can also be coated using the 1800 series products to protect the screw shaft and fins from abrasion damage. Designed for the repair and protection of equipment damaged by fine particle abrasion, Belzona 1812 (Ceramic Carbide FP) is an epoxy composite material combining extremely hard closely packed abrasion resistant ceramic aggregates in a polymeric binder. For the thermal treatment and
conversion stages, pipes damaged by erosion-corrosion can be repaired with SuperWrap II. Engineered to provide superior strength, corrosion and chemical resistance for pipe wrap and patch repairs, this repair system is an alternative solution to replacing defective metallic substrates. For pump coatings, Belzona 1300 systems can be deployed, such as Belzona 1341 (Supermetalglide). Tis technology is designed to increase pump efficiency by using hydrophobic technology to repel process fluids and reduce turbulent flow. Efficiency increases of up to 7% have been recorded on new equipment and up to 20% on refurbished equipment. For the basic process flow stage, incinerator fasteners can be lubricated using the high-temperature lubricant, Belzona 8211 (HP Anti-Seize). Tis is a pre- assembly material for metal components subject to high temperature. It prevents seizure, corrosion, pitting, galling and thread distortion. For chemical containment areas such as chemical bunds and chemical tank linings, Belzona 5892 and Belzona 1391T can be specified. Tese systems provide excellent
Application
areas for repair materials and coatings
Tube sheet rebuilt and protected against the effects of erosion/corrosion
erosion-corrosion protection at elevated temperatures along with resistance to a wide range of process chemicals, such as the lime used in flue gas desulphurisation units. Conveyor plates handling the hot incinerator bottom ash can be protected against elevated temperatures with Belzona 1300 series systems such as Belzona 1391T. Tis ceramic filled epoxy coating provides erosion and corrosion resistance to high temperature equipment operating under immersion up to 130°C. Specially developed for pipe linings and pipe insulation repairs, Belzona 5800 series systems can be deployed. Belzona 5871, for example, can be used to protect operators from direct heat contact burns. A solvent-free system, Belzona 5871 provides a thermal insulation barrier with corrosion protection as well as thermal and sub- zero ‘cool-to-touch’ properties. Belzona 1000 series systems are
Rupture in the water pipeline 44
www.engineerlive.com
frequently used for general repairs to heat exchangers’ components such as tube sheets, flange faces, water boxes and end covers. For example, the composite
repair system Belzona 1111 (Super Metal) provides outstanding protection under many varied service conditions. To protect exterior chimneys from damage caused by weathering and acidic ash, Belzona 5100 cladding systems meet the requirements. For example, the urethane coating Belzona 5111 (Ceramic Cladding) is designed for the protection of metallic and masonry surfaces against physical, chemical and bacterial attack. A combination of Belzona 2211 (MP
Hi-Build Elastomer) and Belzona 3111 (Flexible Membrane) can be applied to protect roof joints. Tese systems have been proven to leave roofs protected for longer periods of time than can otherwise be achieved through conventional welding methods.
As all of these systems can be carried out without the need for hot work, this facilitates a fast, safe and efficient repair and protection solution.
SUPPORTING TRANSITION TO NET ZERO Given the imminent growth of WtE technology, it is essential that appropriate ‘corrosion-resistant materials’, including composite repair systems and protective coatings, are deployed. It is through their installation, that ‘existing facilities and developing technologies’ in the WtE sector can perform to their optimum potential for the long term. In turn, this supports a reduced carbon
future, in line with the 2050 net zero carbon guidelines set out in the Paris Agreement, as well as significant economic savings for governments worldwide.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52