RENEWABLE ENERGY
TACKLING THE PURITY CHALLENGE Tis gap between outputs and purity standards is why AEL systems – the most widely used in industrial applications – require further optimisation to produce green hydrogen at a large scale. Several unit operations using filtration, separation and purification technology are needed to achieve the required purity levels. Once the hydrolysis has taken place, the liquid/gas mixture needs to be cooled, separated and compressed. However, cooling the gas has major cost implications and can be as high as 5% of the total system outlay. Gravity separators, mist eliminators pads, filter vane separators and more recently liquid/gas coalescers are used to separate the liquid contaminants. Tese typically require large housings and must be operated at low velocities to prevent liquid re-entrainment. To add to the purification costs, solid contaminants, originating from oxidation in process piping and equipment such as pumps and compressors, must be eliminated. Adsorbent fines – if being used – are situated in the final drying equipment and may also get released, contaminating the gas. To remove the solid contaminants, disposable gas filters in different micron ratings can be deployed throughout the process. Te final step is the efficient storage of
the hydrogen once it is produced. It can be compressed and stored in tanks, pumped into salt caverns or converted into liquid ammonia using the Haber-Bosch process.
USING INNOVATION FOR STRATEGIC INVESTMENT Tere are now many organisations considering their impact on the environment and how they can create or use green energy. Since hydrogen is the
The hydrogen production process
most abundant substance in the universe, we must use its capabilities for sustainable advantage. Pall Corporation partners with companies to provide R&D, strategic support and products – collaborating to implement innovative solutions to complex challenges. Governmental regulations also play an
important role in energy developments, such as the EU’s Green Deal and a range of tax incentives in the USA for environmentally friendly measures. But can more be done? If we look at the global picture, the need to decarbonise and minimise the damage from climate change is becoming ever more apparent. In 2021 there were numerous episodes of catastrophic and unprecedented weather events across the world: fatal floods in Germany, Belgium, China and the US; a typhoon in the Philippines that killed at least 375 people; rain falling on the summit of Greenland instead of snow for the first time on record – to name a few.
Hydrogen will play a key role in the future energy mix
With COP27 due to take place in Egypt
in November, all eyes will be on the world’s leaders to see what progress has been made since COP26 and what international legislation may be formed to reduce global warming to 1.5°C – the threshold set by the Paris Agreement to minimise the worst effects of the climate crisis. Green hydrogen alone will never be the whole solution, but it can provide a major route on the road to decarbonisation. If environmental sustainability is to be achieved, there needs to be more investment and a cohesive global strategy to enable innovative processes to become fully viable solutions.
Typical separation applications in hydrogen production using AEL
Dr Maria Anez-Lingerfelt is a senior scientist in Pall’s application development team.
www.pall.com
www.engineerlive.com 29
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52