OPERATION & MAINTENANCE OF POWER PLANTS
HO AT TOPIC
Dennis Long explains how electric heaters can help meet decarbonisation goals
P
ressure from industry leaders and legislation changes are encouraging the widespread need to shift fossil fuel use to renewables. One way many industrial manufacturers can embrace this is by shifting process heater systems from fuel-burning to electric. However, the transition is not as simple as throwing a switch. So how can manufacturers can make the change from fuel-burning to electric? Finally, the tides are turning when it comes to process heating. Pressures to electrify all industrial processes are increasing and electric heaters can offer an effective, environmentally friendlier solution. According to the Environmental
Protection Agency (EPA), a substantial portion of global greenhouse gas emissions come from industrial sources burning fossil fuels. Much of this energy is burned on-site for energy and heating needs. Te US Energy Information Administration (EIA) estimates that the industrial sector uses approximately 24 quadrillion British Termal Units (BTUs) of heat per year – roughly one third of the nation’s delivered energy supply. Process heating applications alone account for 36% of total delivered energy consumption within the manufacturing sector.
As a result, the pressures to decarbonise and electrify wherever possible are increasing. Companies industry-wide are quickening decarbonisation of their operations. In fact, a recent survey by Watlow found that over 90% of respondents in the oil and gas industry have developed, or are in the process of developing, a long-term strategy to reach sustainable, low-carbon site statuses.
ELECTRIFYING PROCESSES Electrification of process heating is one of the key strategies for addressing climate change concerns in oil and gas. Electric heaters do not burn fossil fuels and can be powered via renewable energy sources. Electric heat exchangers are no stranger to oil and gas operations, but historically, they have been used only in applications with a nameplate under 1 megawatt (MW). For example, in glycol reboiler heaters, knock- out drum heaters and fuel gas heaters and preheaters, gas-fired process heaters are still used in several ways, since the BTUs’ requirements for some of these processes can only be met by electric heaters with a much higher wattage. However, there is growing potential to use electric heaters for applications requiring more than 1MW but less than 15MW. Tese span several areas, such as renewable fuel production. Tis is because hydrocarbon biofuels that are chemically identical to petroleum gasoline or diesel are produced from biomass sources through various biological, thermal and chemical processes. Electric heaters can also be used in carbon recycling, because methanol created from CO2
can be captured
Operators are looking for methods to reduce emissions and achieve low- carbon site status
18
www.engineerlive.com
from industrial exhaust combined with hydrogen, either collected from industrial waste gas or, alternatively, from water through electrolysis. Besides reducing the use of fossil fuels, electric heaters and heat exchangers have
other advantages including less thermal lag, safer operation, more uniform distribution of heat and smaller overall footprint.
ELECTRIC VERSUS FUEL One of the biggest developments in the area of electrification for process heating is in reliable, medium-voltage process heating systems. Solutions being developed by Watlow can tap directly into medium- voltage lines of up to 7,200V, reducing the need for large step-down transformers, circuits and cabling, which can considerably reduce installation, operation and maintenance costs.
What matters most in achieving process heating parameters is not the method of heating, but the heat flux of the heating surface. When it comes to these kinds of applications, electric heaters can safely achieve operating temperatures comparable to gas-fired heaters and with better uniformity and control. Watlow recently introduced its
Powersafe integrated, medium-voltage control and heating solution – a safe, reliable and clean replacement for fossil fuel alternatives in process equipment. Te new system integrates an electric
heat exchanger, process controller and power system, as well as an isolated low- voltage enclosure including a human
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52