OPERATION & MAINTENANCE OF POWER PLANTS
WHY CHOOSE HYDROGEN BOILERS?
Daniel Gosse reveals how use of green hydrogen in boiler systems represents a significant opportunity in decarbonisation efforts
I
quickly. But why should anyone choose the complex path of generating their own hydrogen, accepting a loss of efficiency of around 30% in the process? After all, green electricity can be used directly in electric boilers, achieving a high degree of efficiency. It’s a plausible response – on sunny or windy days, the electricity is directly available for use in plants and production with an efficiency level of approximately 99%. Due to the fluctuations in the availability of green electricity, which is affected by the weather conditions and time of day, however, an additional CO2
n the short- and medium-term, decentralised solutions with electrolysis and renewable energy are an attractive option for achieving CO2
-neutrality -neutral
energy source is required for compensation. Tis is where the benefits of hydrogen come to the fore: it can be stored at a higher energy density and achieves high degrees of efficiency when used. For these reasons, it is expected that hybrid heating concepts, such as boilers with multi-fuel burners and
Bosch boilers are designed to be “hydrogen-ready”
electric heaters, will become an ever more attractive option.
TECHNOLOGICAL REQUIREMENTS Te use of hydrogen in boiler systems and the corresponding technology is established in sectors in which hydrogen is created as a waste product of chemical processes. As a result, there are a range of known technological requirements for safe, efficient handling. Te following solutions, among others, are suitable for making use of this environmentally friendly gas. Since the hydrogen’s net calorific value per unit of volume amounts to around one third of that of natural gas, appropriate technical measures are required to triple the fuel volume. Measures to control the high combustion temperatures of approximately 2,000°C and the faster combustion
Hybrid heating options will become increasingly popular
behaviour must also be considered. Tis concerns pipes, nozzles, high-temperature- resistant components that come into contact with flames, burner fans and the combustion chamber, in particular. Te hydrogen burner is usually designed as a complex multi- fuel firing unit with a correspondingly demanding control system, to enable full flexibility and supply reliability. Te applicable emission regulations regarding NOx can be reliably met when using flue gas recirculation. To prevent reignition of the hydrogen firing unit in the fuel supply line, the combustion system optionally features a flame arrestor upstream.
ESTABLISHING A SUSTAINABLE ENERGY SUPPLY Green hydrogen and electricity represent
a chance to comprehensively avoid CO2 emissions from fossil fuels. Currently, the limiting factors are still availability and economic feasibility – the technology itself, in contrast, is fully developed and ready for the use of hydrogen. For many new boiler plants, it makes sense to provide interfaces for later conversion and to design the boilers as “hydrogen-ready” or as a hybrid with an electric heating element. In some cases, it is also possible to modernise existing boiler systems for the use of alternative fuels for an acceptable cost.
Daniel Gosse is with Bosch Industriekessel.
www.bosch-industrial.com
www.engineerlive.com 21
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52