RENEWABLE ENERGY
encompasses the capture of CO2 CO2
. Te then is turned into liquid and stored
underground – which is a complex and expensive process. By contrast, ‘green’ hydrogen does and so is the ‘cleanest’
not produce CO2
option. It is made by the electrolysis of water powered by renewable energy sources, such as wind or solar. Green hydrogen production has been proven to work at a small-scale, but the challenge remains as to how to make it commercially viable, with hurdles including technological constraints, regulation, and cost. All three need to be tackled to realise green hydrogen’s potential to become a truly transformational energy source.
WHAT ARE THE PROCESSING OPTIONS?
SILVER BULLET? IS GREEN HYDROGEN A
Dr Maria Anez-Lingerfelt assesses the role of green hydrogen in achieving net zero
T
he pressure to use clean energy to power industrial operations and consumer services is building. However, the industry is still
struggling with the challenge of how to do this at scale and in a cost-effective way. Renewables have been a key focus for many years now, but each source has its limitations. If we are to reach net zero carbon emissions by 2050, we need to harness clean power that is practical across production, storage, delivery and usage.
28
www.engineerlive.com
Hydrogen is seen as a guiding light for the future as it produces no toxic emissions, but different production processes have different environmental impacts. Te majority of hydrogen produced is derived from fossil fuels, yet with the gasification of coal for ‘brown’ hydrogen and steam methane reforming from natural gas for ‘grey’ hydrogen, the downside is the production of carbon dioxide. ‘Blue’ hydrogen is also processed from fossil fuels, but it
Te methods for producing green hydrogen are complicated. Te electrolysis process involves the dissociation of the water molecule in an electric field. Hydrogen is then produced at the cathode and oxygen at the anode with an electrolyte present in between the electrodes. Tere are three types of electrolysers used to achieve this. Te alkaline electrolyser (AEL) uses liquid potassium hydroxide as the electrolyte and is the most widely used in industrial applications, but comes with some drawbacks, including lower purity levels and lower energy efficiency. Polymer electrolyte membrane electrolyser (PEM) uses a solid polymer electrolyte and is increasingly being favoured because it has fewer of these drawbacks but is still expensive compared to AEL. Finally, solid oxide electrolysers (SOEC) use a solid ion-conducting ceramic electrolyte – a technology that holds great potential but is still in the early stages of commercialisation. Regardless of the electrolysis technology used, the hydrogen stream produced needs to be further processed to remove solid, liquid, and gaseous contaminants. It is in this process that the real technical challenge lies because the regulations around gas purity specifications are extremely stringent. Typically, concentrations between 2,000-6,000ppm (parts per million) of oxygen and more than 2,000ppm of water are seen contaminating the hydrogen produced using commercial alkaline electrolysis. Te maximum concentration allowed for fuel cell vehicles is 5ppm of each under the ISO standard for hydrogen fuel quality.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52