44 Air Monitoring A call for clarity from air quality information systems
One of the world’s leading developers of air quality monitoring and forecasting technology is urging caution when interpreting commonly used methods for displaying air quality data.
The overall goal of the company Airly, is to make air quality visible and understandable for all. However, Airly CEO Wiktor Warchalowski says he is concerned that air quality data can be displayed in several different formats, which could be confusing or even misleading.
The measurement values from air quality sensors are usually of the greatest value to members of the public when they are displayed in a simple, easy-to-understand format. To achieve this, governments and organisations utilise an air quality index (AQI) to communicate levels of air pollution. AQI information is obtained by averaging readings from air quality sensors and categorising them in a traffic light system to help viewers understand the current or forecast air quality. This categorisation is generally based on commonly accepted norms and the latest research on the effects of air quality on health.
“An AQI is an excellent tool for imparting information without having to educate readers on specific pollution concentration values,” Wiktor explains. “The problem, however, is that several different AQIs exist around the world, and they all vary in the pollution levels that they regard as high, medium or low. Consequently, at Airly, we find that we can pass our sensor data through two different AQIs and create two completely different displays – from the same data, in the same place, and at the same time!”
In the UK, Defra has created the Daily Air Quality Index (DAQI) to display levels of air pollution and provide recommended actions and health advice. The index is numbered 1-10 and divided into four bands. Low pollution levels (1-3) are coloured green, Moderate pollution (4-6) is orange, High (7-9) is red and Very High (10) is purple.
Within DAQI, for example, level 3 (Low pollution - green) for fine particulates (PM2.5 the European AQI, 25-50 µg/m3
for PM2.5 . ) is defined as 24-35 µg/m3
tighter targets for PM2.5. In September 2021, it published a new lower guideline value of 5 µg/m3 24-hour average guideline value of 15 µg/m3
PM2.5 (24-hour average). In contrast, within
is defined as Poor air quality and shown as red. The World Health Organization (WHO) has produced even for annual average concentrations of PM2.5
, and a
Airly recently developed a new AQI, based on WHO Guidelines. This Airly AQI (AAQI) displays levels of air pollution in comparison with WHO guideline values. So, for example, the AAQI value for 15 µg/m3 times the guideline value.
is represented by 100, and a display of 500 would mean that PM2.5 levels are 5
Where more than one air quality parameter is measured, AAQI displays the most harmful value (the parameter furthest above the guideline value) so that viewers can see how bad the air is. The display provides 6 levels of pollution, which are split to provide 10 different colour levels (see chart).
Summarising, Wiktor Warchalowski says: “The main objective of AQIs is to provide simple to understand information on air quality, so that citizens can easily perceive three issues: (1) that one area on a map is more polluted than another, and (2) that air pollution today is better or worse than it has been in the past.
“These two pieces of information enable citizens to make informed lifestyle decisions, and all of the main AQIs meet that goal. However, goal (3) is to allow citizens, and especially those that are vulnerable, to determine whether current or forecast air quality is good or bad, and as has been demonstrated, this is where different AQIs can display apparently conflicting information.
“There are two solutions to this problem. Firstly, governments could agree on one universally accepted AQI; but air quality objectives and timelines vary internationally so this seems unlikely. The second solution is therefore mostly likely, and this is for vulnerable citizens to learn the absolute values for specific pollutants that represent a threat. It therefore falls on those of us that develop these systems to develop AQIs that deliver all three goals in a clear, and easily understandable way.
“Finally, when providing air quality data to citizens, we should remember that not everyone has constant access to an air quality website (or the enthusiasm to find it). For this reason, Airly’s monitors incorporate LED lights providing AQI information for passers-by.”
For More Info, email: email:
For More Info, email: email:
For More Info, email: email:
60738pr@reply-direct.com
Introducing the ultimate pressure sensor for water and air systems
Rotal Innovative Technologies’ (RIT) Sensor Technological Layer (STL) is a cutting- edge solution for sensor developers and manufacturers that signifies a new chapter in sensor technology. It streamlines development processes and minimizes time-to-market and supply chain operational costs, and can upgrade conventional sensors to smart sensors that are equipped for standalone IIoT solutions. The technology merges software and hardware to provide a comprehensive modular solution.
The raw output from multiple sensors is processed through hardware and software layers, producing a cost-effective and long- lasting solution for sensor manufacturers. The microprocessor powers the technology, responsible for data analysis, communication, and switch activation. It enables advanced transduction by transmitting analog signals in response to different sensor inputs and software settings, which are controlled via the application and Bluetooth. The interface includes discrete analog outputs, data logging capabilities, remote operation functions, cloud integration, Bluetooth, and RS232/RS485 communication lines, allowing users to monitor the device’s performance at all times.
RIT’s STL is built with durability in mind, featuring low power consumption, weather resistance, and ease of installation and operation with no required maintenance. All features are customizable using serial communication or Bluetooth, and the device can serve as a switch, differential switch with analog output, and data logger simultaneously. The features can also be activated or deactivated based on the end-user license. The technology is well-suited for cybersecurity applications, equipped with built-in encryption for secure communication.
In conclusion, Rotal Innovative Technologies’ STL is a cost-efficient, dependable, and accurate solution for sensor developers and manufacturers.
For More Info, email: email:
For More Info, email: email:
For More Info, email: email:
IET ANNUAL BUYERS’ GUIDE 2023/24
60120pr@reply-direct.com
Missed the latest issue? You can read all the latest Press Releases, News and Articles online.
www.envirotech-online.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128